Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Jul 21, 2010 #1 Were is the best place to connect the boost line for a boost gauge on a 2.5l cr Cheers
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Jul 27, 2010 #2 Would it ok to drill and tap a 1/4" bsp whole and put a fitting in the intercooler
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Jul 30, 2010 #3 just drilled and taped a whole in the side tank of my intercooler works a treat.
hutchstr Member Joined Jun 13, 2010 Messages 389 Reaction score 0 Location Perth Jul 30, 2010 #4 put up a pic mate when you can so we can have a look...
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Jul 30, 2010 #5 yep sweet as ill take one in the morn in the light
C coley350 Member Joined May 13, 2010 Messages 47 Reaction score 0 Jul 30, 2010 #6 hope ya didnt drop swarf inside the cooler to go through the motor. Id say ya up for a rebuild sooner or later if you did. Whats wrong with putting a T in the line that goes to the waste gate?
hope ya didnt drop swarf inside the cooler to go through the motor. Id say ya up for a rebuild sooner or later if you did. Whats wrong with putting a T in the line that goes to the waste gate?
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Jul 30, 2010 #7 nah i took the cooler of drilled it washed it and blew it no shit in it not even blow by oil lol. cos its way to tight down there and to hot this was easier
nah i took the cooler of drilled it washed it and blew it no shit in it not even blow by oil lol. cos its way to tight down there and to hot this was easier
hutchstr Member Joined Jun 13, 2010 Messages 389 Reaction score 0 Location Perth Jul 30, 2010 #8 Mahooody said: yep sweet as ill take one in the morn in the light Click to expand... thanks mate
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Aug 1, 2010 #9 Last edited: Aug 1, 2010
hutchstr Member Joined Jun 13, 2010 Messages 389 Reaction score 0 Location Perth Aug 1, 2010 #10 ahhhhh! good work, have you got it running ok?
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Aug 1, 2010 #11 yeah runs awesome no probs at all
hutchstr Member Joined Jun 13, 2010 Messages 389 Reaction score 0 Location Perth Aug 1, 2010 #12 Good stuff, will do mine soon.. Any tips or tricks?
Mahooody Member Joined Apr 6, 2010 Messages 150 Reaction score 0 Location Melbourne Aug 1, 2010 #13 nah nothing to it just make sure the are no shavings left in the intercooler. by the way its running 18psi stock very high i think
nah nothing to it just make sure the are no shavings left in the intercooler. by the way its running 18psi stock very high i think
hutchstr Member Joined Jun 13, 2010 Messages 389 Reaction score 0 Location Perth Aug 1, 2010 #14 cool! yeh theres a thread on here somewhere about boost and I think most were around the 15 or 16 psi...
cool! yeh theres a thread on here somewhere about boost and I think most were around the 15 or 16 psi...
