Aussie Frontier
Member
Has anyone lifted the load sensing valve when lifting the rear?
only going max of 50mm but just curious if anyone has moved the valve.
only going max of 50mm but just curious if anyone has moved the valve.
Load Sensing Valve
- Thread starter Aussie Frontier
- Start date
Help Support Nissan Navara Forum:
Leprechaun
Member
- Joined
- Apr 3, 2009
- Messages
- 2,792
- Reaction score
- 2
I adjusted mine as to the diagram/sticker on the inside of the passenger door.
Aussie Frontier
Member
Shows how observant I am lol
I never looked at that sticker lol
So you didnt raise the lower spring mount just made the adjustment kool
this is what im on about
http://72.34.32.141/~snakerac/product_info.php?cPath=3_106_273&products_id=2336&osCsid=dc26264243e0ff0c8eb560b82b64fa41
I never looked at that sticker lol
So you didnt raise the lower spring mount just made the adjustment kool
this is what im on about
http://72.34.32.141/~snakerac/product_info.php?cPath=3_106_273&products_id=2336&osCsid=dc26264243e0ff0c8eb560b82b64fa41
Last edited:
Leprechaun
Member
- Joined
- Apr 3, 2009
- Messages
- 2,792
- Reaction score
- 2
I just made the adjustment. Seems OK and never really thought about it since doing the lift. The brakes easily out perform the mud tyres, with my stiff setup.
Aussie Frontier
Member
Fair enough
bring up and old thread here , but with my recent 2inch lift plus new muddies i feel as if i have no brakes i looked under neath and saw the allan key screw is that what u adjust if so do u tighten it or loosen it ?
Aussie Frontier
Member
I loosened the 2 nuts that holds the bracket till I got the distances according to the placard thing on the left front pillar
