biggazza
Member
Just noticed the rear seal leaking a bit,anybody know is there any special proceedures in changing it,or is it the normal take the shaft off,remove nut and yoke,replace seal etc.
D22 rear pinion seal leaking
- Thread starter biggazza
- Start date
Help Support Nissan Navara Forum:
D
Dave
Guest
Pretty much what you said it should be.
Add alot of brute strength to undo the pinion nut.
Dave.
Add alot of brute strength to undo the pinion nut.
Dave.
biggazza
Member
Yeah,thanks dave wasn't sure if there was any preloads or crushs washers,sounds like the nuts are still he same,something else to do over the break.
D
Dave
Guest
The C200 has been around for like 30 years, there not very advanced.
Dave.
Dave.
biggazza
Member
So they didn't throw something out that works.
D
Dave
Guest
Pretty much, a R200 is a C200 centre. Just IRS and IFS applications.
Dave.
Dave.
biggazza
Member
just curious will it be left or righthand thread,i imagine it will be righthand, might be somebody out there that's done one.
Leprechaun
Member
- Joined
- Apr 3, 2009
- Messages
- 2,792
- Reaction score
- 2
Should be right handed, use a rattle gun or a breaker bar with a length of scaffold pipe off it so you don't blow out your back.
biggazza
Member
thank's kingcab,the good old scaffold tube,like it.
