Go Back   The Navara Forum > D22 > D22 Suspension & Steering

Thread Tools Display Modes

Old 07-04-2015, 12:54 PM
atcmatt's Avatar
atcmatt atcmatt is offline
Join Date: Jun 2013
Location: Sydney
Posts: 183

Hi guys. Cheers for the replies. Well if I had my time again I would not bother with them. They are a harder compound than the stock ones, way less 'squish' in these. I would just run the stock ones, however if your stock ones are missing then these are probably a good replacement. Time will tell anyway. As for fitting them, the threads that come on them are way to long. So what I did was put the nut on, about 3mm till it hits the bottom of the bump stop, then ground the excess thread off at the bottom on the nut. It would be to hard to get the nut on in that tight UCA with the full thread left on. The hole in the stock UCA does not need to be drilled out. Thread fits perfectly. You will need to good clamp to pull the lower control arm down to get the new bump stop in, not hard just a bit fiddly. Hope this helps some of you. Matt

Last edited by atcmatt; 07-04-2015 at 12:56 PM.
Reply With Quote
Sponsored Links

Old 12-10-2017, 07:34 AM
happy john's Avatar
happy john happy john is offline
Advanced Member
Join Date: Dec 2012
Location: Brisbane Northside
Posts: 4,675
My Mood:

Saw this at a job I was working at last week. The owner had removed all his bumpstops and was driving around like that. I asked him why and the reply was to get more travel lol.
Attached Thumbnails
Click image for larger version

Name:	IMG_0375.jpg
Views:	73
Size:	216.7 KB
ID:	22328  
Naving since 89
Reply With Quote

Bumpy Shit
Old 12-10-2017, 09:03 PM
highway man's Avatar
highway man highway man is offline
Join Date: Mar 2016
Location: Hillman, Western Australia
Posts: 224
My Mood:
Default Bumpy Shit

Hey, that's my Driveway you know!
highway man!
Reply With Quote

Bump stops
Old 27-02-2018, 12:14 PM
Fatflash82 Fatflash82 is offline
Junior Member
Join Date: Apr 2014
Location: Brisbane
Posts: 8
Default Bump stops

I just bought these on eBay located in aus, they were the last pack but kept an eye out for more


Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 03:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |