EGR Help

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Stumblebum

Member
Joined
Jan 19, 2013
Messages
4
Reaction score
0
Location
Melbourne
So my EGR pipe from the exhaust manifold has split where I assume it was welded, as you can see from the photos. Nissan sell the part for $130, But can I just do the EGR mod by putting a blocking plate at both the Exhaust manifold before the split pipe and also another one after the split at the intake manifold instead of replacing the piece of pipe?

Thanks for any input
 

Attachments

  • IMG_1151.jpg
    IMG_1151.jpg
    209.9 KB · Views: 92
  • IMG_1152.jpg
    IMG_1152.jpg
    203.8 KB · Views: 89
Last edited:
makes a good roar when it breaks doesn't it !
yeah just block both ends. i cut the pipe out and used the ends to hold the blanks in place.
you probably want to do the same as i think its illegal over there to remove the egr pipe.
 
Cheers for the info fellas, worked a charm and all sorted now!

Made a bit of a bang when it happened and thought I threw a bearing and had a bottom end knock with how loud it was, had me shitting myself for a little bit.
 

Latest posts

Back
Top