Nugget here.

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nugget

Member
Joined
Aug 21, 2008
Messages
1
Reaction score
0
Location
Cranbourne
Hi Nugget here ,

my Navara is an old 1993 single cab White ute 2.4 manual

My goal is to drag race it and "pull" a high 10 second pass.
Although this is a long term project.

Mods so far include:

Remove rear tub
Install short dual cab alluinium tray and Trim chassis rail ends
install big H233b ( 9 1/4 " ) diff 4.1 Ratio and installed detroit locker
Remove helper springs and make Caltrac traction bars
Install Ford C4 Austomatic trans, Hi stall convertor, BM shifter,Trans cooler and one peice tail shaft. Digital speedo convertor.
Bucket seats, new carpet
Instal 240sx intake manifold and reprogramed Pintara ECU
Remove power steering and install manual
remove front sway bar
relocate battery to rear / side under tray
Sunraisier 15x8 and 15x5 Rims

Ect.......

NO it,s not a show car , its just a dirty streeter

Future mods :

Sticky Mickey Thompson Drag Radials/ skinny Nankangs up front
Weldon Fuel Pump
1000cc fuel injectors
Rancho rear shocks, Pedders custom 90 / 10 front shocks
Engine rebuild, Arias pistons,Eagle rods,ATI balancer
Reground solid Drag race cam, Oversize valves , Mild port work
Garrett Gt 35/ .63 AR turbo, CX racing Manifold, Tial wastegate, BOV
Stinger standalone ECU. intercooler >>>>>>>

Pictures soon , Nugget.
 
Last edited:
Welcome

Hi there Nugget!
Welcome to the forum, look forward to seeing some pictures soon :)
 
So she is KA24E powered. You can make some decent power out of these motors. The DE version is better though.

Alot of custom made parts are needed if your gonna put more then 5-7psi.

Have you considered a VG30DET or DETT. Cheaper to pull the times you want.

Post some pics.

Dave.
 

Latest posts

Back
Top