PSRCoilovers

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

WRXV8S

Member
Joined
Apr 22, 2017
Messages
8
Reaction score
0
Location
Australia, Queensland
Just need some advice...I have a 08 Navara D40 Spanish model and have recently bought off a bloke PSR Coilovers but I want to check if they are set at 4inch lift and how I can measure them to check if it will lift my truck. Sound advice would be greatly appreciated.
 
They're going to be length-related but also spring strength which is dependant on the weight of the front end of your ute. They fitted HD springs in mine because I have a steel bar up front (and had a winch as well). Removing the winch hasn't given me much of a lift, I'd say my front springs have probably sagged a little in the years since they went on.

A suspension specialist is your best friend here.
 
Above mentioned company are (allegedly:redcool:) notorious for shortcuts, off-road only installs and plain old rubbish customer service!.
Wondering how much did you pay for the coilovers?
What spring and shock combo is in there?
Lastly, is there s big strut spacer in the mix?
 

Latest posts

Back
Top