D40 reading faults on warning light flash

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

birchwood

Member
Joined
Jun 20, 2012
Messages
34
Reaction score
0
Location
Perth, WA
Hi guys
This is doing my head in. Cannot remember how to read fault codes from warnong light flashes. Had a look around this forum but cannot find anything.
Asnyway I'm getting 10 quick, 10 quick, 10 quick, 10 slow.
Ca n anyone translate this for me and let me know the method for reading all codes?
Thanks.
 
Last edited:
10 flashes means zero. Sounds like there's nothing detected by the ECU. if you get (say) 10 flashes, 2 flashes, 7 flashes you have code 027 - read it as P0027 and you can Google the answer it's mostly correct because the D40 uses a mostly standard code list.

I use a $5 bluetooth OBD adapter and a $5 Android app called 'Torque' to read codes. You can get cheaper apps, but Torque does so much more than just reading codes. Many of these apps (Torque does) also allow you to clear the error codes.
 

Latest posts

Back
Top