Mcc bullbar fitting

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gramps

Member
Joined
Nov 30, 2015
Messages
2
Reaction score
0
Location
Hervey Bay
Hi all, first post to the page.
The names Jake and I've just bought a 2013 d40 rx Thai built.
I'm after any info from anyone regarding fitting an Mcc bullbar yourself.
Does the bumper need to be cut, how hard it is etc.
Money's tight and I'm keen to give it a solid crack myself.
Any info would be great thanks.
Love the site it's been great so far :)
 
Last edited:
Cheers guys. Yeah I haven't bought it yet just thought I'd check first. It does come with instructions and I will be reading them thoroughly don't worry I DO NOT want to screw this up. I'll have a flick through that thread thanks again.
 
from memory things you will need are good masking tape. a jigsaw, a 10mm drill bit to cut down. and many beers....
 
Just dont use a jigsaw on the plastic bumper, you would cut the inner plastic and destroy it! Use a sharp stanley knife, it works great.
 
If you look at the fifth pix down in my thread you can see the inner plastic. Its the black stuff with the semi circular cutouts on either side. I dont know if the bumper from a 2013 is the same as its the facelift model im guessing.
 

Latest posts

Back
Top