m.stockman
Member
- Joined
- Nov 9, 2010
- Messages
- 3
- Reaction score
- 0
Hi there,
Ive just replaced my exhaust manifold(cracked between 2 and 3) and installed the following;
3"exhaust
new intercooler
new radiator
egr blank
I also cleaned intake manifold and did a service as well(new belts, oil filter, fuel filter, new coolant). Also checked Timing Chain and was 60% worn according to www.yd25.com diagnosis check list
After all this i started her up and now have a top end knocking/tapping. Read a few post and checked belt tightness and also sprayed with wd40 no fix. Removed the egr blank no fix. also did a ecu reset as i read you need to do after fuel filter replacement.
Will post video tomorrow but any help or ideas would be great
thanks
Ive just replaced my exhaust manifold(cracked between 2 and 3) and installed the following;
3"exhaust
new intercooler
new radiator
egr blank
I also cleaned intake manifold and did a service as well(new belts, oil filter, fuel filter, new coolant). Also checked Timing Chain and was 60% worn according to www.yd25.com diagnosis check list
After all this i started her up and now have a top end knocking/tapping. Read a few post and checked belt tightness and also sprayed with wd40 no fix. Removed the egr blank no fix. also did a ecu reset as i read you need to do after fuel filter replacement.
Will post video tomorrow but any help or ideas would be great
thanks