D40 camber problem.

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chrisbarben

Member
Joined
Jun 29, 2017
Messages
2
Reaction score
0
Location
Newcastle
Hi guys, my 07 stx has no camber adjustment bolt on the front of the lower control arm. It has a 2 inch lift with extended top ball joints. I’ve got a massive amount of positive camber and is scrubbing out the outer tyre. I’ve fitted a superior engineering camber kit to one side only so far and there is some difference but it’s still negative camber on full adjustment. Has anyone else experienced this and what did you do about it? Offset bushes? I know the extended ball joints probably don’t help either. Cheers


Sent from my iPhone using Tapatalk
 
I fitted Performance Suspension UCA's to mine but still had to cut 10 mm off them to get the correct alignment.
 
I fitted Performance Suspension UCA's to mine but still had to cut 10 mm off them to get the correct alignment.



I’ve only put the extra camber adjustment bolt in the bottom, thinking I might have to look at fitting new uppers.


Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top