LLadnar's New STX

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
reinstall the Lower control arms and struts with supplied spacers.

20130926_143451.jpg


refit the spindle to the Lower control arms, drive shaft and then UCA.

20130926_143506.jpg
 
finish fitting brake calipers, swap the tie rod ends from from the left and right and turn them facing down. Fit the new extended brake lines to the front and back.
For the rear I fitted a set of Tough Dog leafs with the extended shackles. didn't use their lifting blocks. And fitted the Bilstein rear shocks.

Had a set of Dick Cepek FCII 285/70/17's

20131005_094931.jpg
 
Last edited:
Thanks very much mate, she's not quite finished but I've been in a bit of a lull waiting on a couple of things. Must fit the UCA's and coilovers soon if nothing goes wrong.
 
These are way way over due. Photo's of the UCA fitted and the Radflo adjustable struts, I got these from PRG in the states, but you can get them from KPD4x4 in vic now.

picture.php


picture.php


also 32" light bar.

picture.php
 

Latest posts

Back
Top