Go Back   The Navara Forum > D40 > D40 Suspension & Steering

Reply
 
Thread Tools Display Modes

D40 camber problem.
  #1  
Old 27-03-2018, 11:27 AM
Chrisbarben Chrisbarben is offline
Junior Member
 
Join Date: Jun 2017
Location: Newcastle
Posts: 2
Default D40 camber problem.

Hi guys, my 07 stx has no camber adjustment bolt on the front of the lower control arm. It has a 2 inch lift with extended top ball joints. Iíve got a massive amount of positive camber and is scrubbing out the outer tyre. Iíve fitted a superior engineering camber kit to one side only so far and there is some difference but itís still negative camber on full adjustment. Has anyone else experienced this and what did you do about it? Offset bushes? I know the extended ball joints probably donít help either. Cheers


Sent from my iPhone using Tapatalk
Reply With Quote
Sponsored Links

  #2  
Old 28-03-2018, 01:45 AM
bazt's Avatar
bazt bazt is offline
Member
 
Join Date: May 2013
Location: Qld
Posts: 37
My Mood:
Garage
Default

I fitted Performance Suspension UCA's to mine but still had to cut 10 mm off them to get the correct alignment.
__________________
The only time you have too much fuel is when you're on fire.

Tuscan Red 2013 Navara ST-X Blackline, Uniden TX 3540 UHF, Uniden iGO 850 Camera, Steelmate parking sensors, Redarc TowPro Brake Controller, Plazman Turbo inlet pipe, 3" Exhaust, 4" AAA SS snorkel, RD Technics tune, Dobinsons 2" lift kit with MRR Shocks, Performance Suspension UCAs. SMM Steel canopy.

MDC XT17 HRT Van

White 2011 VW Golf R with all the good bits, RD Technics Race tune
Reply With Quote

  #3  
Old 28-03-2018, 01:56 AM
Chrisbarben Chrisbarben is offline
Junior Member
 
Join Date: Jun 2017
Location: Newcastle
Posts: 2
Default

Quote:
Originally Posted by bazt View Post
I fitted Performance Suspension UCA's to mine but still had to cut 10 mm off them to get the correct alignment.


Iíve only put the extra camber adjustment bolt in the bottom, thinking I might have to look at fitting new uppers.


Sent from my iPhone using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 02:22 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |