D40 navara washer jets adjustment

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dazza63

Member
Joined
Jun 18, 2019
Messages
79
Reaction score
8
Location
Australia
My windscreen washer jets work but are not adjusted properly I see there is some sort of little screw type adjuster on the side of the nozzle but it don't move Im guessing this is the adjust the angle any ideas on how to free it up or how to adjust them up.
Thanks
 
This could be wrong as I don't have a d40. On the last several brands of cars I have owned you simply adjust them by putting a pin or a paper clip (if it fits) into the hole and moving it to where you want it.
 
the d40 washers are different, no pin holes, as they just have a single slit. easy to remove, just use a thin flat screwdriver or a chisel and pry the washer body up from the windscreen end first, easy to do. then just lift it out a bit and pull it out of the tube to clean with a pin. it's supposed to be a flat broad spray!
 

Latest posts

Back
Top