ShortyNavros
Member
Good solution to know about if I ever have this problem, seems like a bloody cheap fix for all the issues people have been getting
had a mate that had random no starts in one of his cars. spend thousands on mechanics etc who replace ecu ignites etc. i tracked it down to the ecu relay, which he had a spare. so the actual fix cost him nothing!Good solution to know about if I ever have this problem, seems like a bloody cheap fix for all the issues people have been getting
Hey guys so os that what has fixed
Your problem the starter relay or
Sarter
Itself? My ute is
Doing the exact same thing.
Chenged fuel filter and primer
Changed
Glow plugs
Done crank sensor
Checked for air being sucked in (none)
But did find that the injector pump is only getting 10v on crank.
So basicly the mechanic said that its not geting enough voltage to start the ute but he doesn't know what's causing it to only get 10v
Hey guys I know it's a pretty old post but I've have the same problem changed the crank position sensor and was still there.. I checked all earths and found the earth that is behind the battery was dirty and loose was the problem and why it would be the position sensor code is because this is the earth for that.
Hi guy's issue fixed!
what it was, is when it went in to have head diagnosed they had to remove the glow plugs, well when the mechanic put them back in he slid the seals over the glow plugs and just tightened the seals down,
hence the glow pluges still had about another 15mm to be tightened down to seal.
Now once i checked and fixed his F!@#K up it now starts like a dream again and shuts down smoothly, hope this works for you guy's
Enter your email address to join: