D21 selector rings

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Pepe

Member
Joined
May 11, 2014
Messages
15
Reaction score
0
Location
North Island, NZ
Hi, just wondering if someone can help me. I have a 91 Navara 4x4 running TD27 diesel and 5 speed gearbox. Had a problem with the 4th gear jamming solid caused by the small blocks jamming as have the wrong sliders??.
Seems like I might had the wrong outer selector rings on as found parts from another box with wider rings & they now fit better. The ones in the box were: 3rd/4th: 20mm width & [ I have 25mm width spare] ; on the 1st/3rd selector 19mm yet [ the spare is 23mm width ]. This would allow coverage of the synchro rings so I am thinking my gearbox required the latter width selectors.

Does anyone know if gearboxes differ in selector outer rings esp on their widths as not too sure if the gearbox parts are identical as I was given some parts which obviously now were the wrong ones.



Also does anyone have info on these gearboxes as do not have a workshop manual. Many thanks
 
Last edited:
Back
Top