Go Back   The Navara Forum > D40 > D40 550 Engine & Gearbox

Reply
 
Thread Tools Display Modes

Cruise contol [SOLVED]
  #1  
Old 26-09-2017, 12:33 PM
jimbo jimbo is offline
Member
 
Join Date: Aug 2009
Posts: 54
Default Cruise contol [SOLVED]

Hi guys l lost cruise control on my 550 i press cruise button and not working any ideas
Reply With Quote
Sponsored Links

  #2  
Old 26-09-2017, 07:44 PM
landmannnn landmannnn is offline
Junior Member
 
Join Date: Sep 2016
Location: UK
Posts: 25
Default

Quote:
Originally Posted by jimbo View Post
Hi guys l lost cruise control on my 550 i press cruise button and not working any ideas
A few of possibilities,
  • The clock spring has failed losing connection
    Your brake light switch is out of adjustment
    The set button has developed a fault
Reply With Quote

  #3  
Old 27-09-2017, 04:12 AM
Old.Tony's Avatar
Old.Tony Old.Tony is offline
Administrator
 
Join Date: Oct 2009
Location: Mid Coast Region, NSW, Australia
Posts: 14,898
My Mood:
Garage
Default

As above. I've only just removed and tested my own clock spring because my air bag light's been flashing - clock spring is busted, there's no continuity from one of the air bag wires to the pins in the bottom white connector (the other wire is ok).
__________________

Check out the FAQs by clicking here!



"Money can't buy happiness, but it does make misery a lot easier to deal with."
Reply With Quote

  #4  
Old 27-09-2017, 12:14 PM
DIRECT Dent Repair's Avatar
DIRECT Dent Repair DIRECT Dent Repair is offline
Member
 
Join Date: Jun 2011
Location: west hoxton nsw
Posts: 56
My Mood:
Default

Quote:
Originally Posted by jimbo View Post
Hi guys l lost cruise control on my 550 i press cruise button and not working any ideas
When your EGR is playing up your cruise wont work on the 550's
Reply With Quote

  #5  
Old 28-09-2017, 01:24 PM
jimbo jimbo is offline
Member
 
Join Date: Aug 2009
Posts: 54
Default

Thanks guys i will check wot you guys said and let yas know how i went
Reply With Quote

  #6  
Old 28-09-2017, 02:05 PM
nedm1989 nedm1989 is offline
Member
 
Join Date: Sep 2013
Location: Sydney, Australia
Posts: 118
Default

Get yourself an OBD2 scanner mate, either a bluetooth one if you have an andriod phone or a wifi one if you have an iphone, they are pretty cheap with the bluetooth ones being $15 and the wifi ones being about $40-45, I keep mine in the ute all the time just in case something unexpected happens.

Then it's just a matter of looking up the code, it'll make things a whole lot quicker and easier, and end up costing you less as you'll know the exact fault.
Reply With Quote

  #7  
Old 30-09-2017, 07:50 AM
jimbo jimbo is offline
Member
 
Join Date: Aug 2009
Posts: 54
Default

Just tried on scangauge and no fault codes
Reply With Quote

  #8  
Old 08-10-2017, 05:30 AM
karlos_1984 karlos_1984 is offline
Junior Member
 
Join Date: Nov 2014
Location: SA
Posts: 24
Default

mine did the same, it was just a crook brake light globe. disables cruise because it's a safety thing because it thinks the brakes aren't working due to the crook light or something along those lines. check your bulbs.
Reply With Quote

  #9  
Old 08-10-2017, 11:53 PM
Romdave Romdave is offline
Junior Member
 
Join Date: May 2017
Location: Western Australia
Posts: 17
Default

I’ve just replaced the neutral position switch on my 09 D40 manual STX. Cruise control now works again but now when I’m in 3rd gear the car begins to splutter when it reaches 3000rpm and does the same in 4th. And it won’t go over 3000rpm when in both gears. I’ve heard a faulty NPS could cause this. Is this true? The new switch is a genuine part purchased through Nissan.
Help anyone! I’m going away this coming weekend and would like to get it sorted before then.
Reply With Quote

  #10  
Old 11-12-2017, 10:33 AM
raptorthumper raptorthumper is offline
Member
 
Join Date: Jan 2013
Location: Bendigo
Posts: 115
Default

Mine has stopped working too. I replaced the clock spring at $255.80 part number 255675X30A and its still not working. Replaced both brake pedal switches too on brake pedal.

I've given up. Brake lights work. Very occasionally it will work but the set light just flashes. I'm wondering if it the steering wheel angle sensor now. No fault codes and doesn't work after I clear all codes with my OBD2 tool.

Let me know if you solve this.


_

Last edited by raptorthumper; 11-12-2017 at 10:37 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 12:32 PM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |