bigkev
Member
hi i just got myself a 09 navara just wondering on what sort of lifts u can get and around how much they cost but i dont want 2 tighten up the torsion bars because of the bump stops
thank u
thank u
lift sizes for a 09 navara
- Thread starter bigkev
- Start date
Help Support Nissan Navara Forum:
RustyNav09
Member
Mate look under the suspension section in the d22 part. All info u need is there. Also contact Zordo a member on here, he will give you great advice and correct item.
Lasoya
Member
If you dont want to wind the torsion bars up then the only way is to give it a body lift, which requires engineering to pass it, In WA you will have to do a swerve test
You can easily put a 2" suspension lift kit in and wind the torsion bars up 50mm, you can get around 70-80mm before you will hit the bumpstop's. Generally you want to have a 10-15mm gap on the bumpstop
You can easily put a 2" suspension lift kit in and wind the torsion bars up 50mm, you can get around 70-80mm before you will hit the bumpstop's. Generally you want to have a 10-15mm gap on the bumpstop
Last edited:
scooba_285
Member
i also have a 09 navara, MY08, just order a ironman 2 inch suspension lift off ebay for $1145, will be able to put slightly bigger tyres aswell
bigkev
Member
thanks heaps for the help just looking in it at the moment cheers 
