Hey everyone
My odometer and speedo is not working, looking for a replacement dash cluster to suit the series 1 navara, series 2 looks to have different plug connectors and will not work.
Located in Sydney
Please text Jesse 0433 373 721
I went out and purchased the Provent today.
Turned out very expensive after including all the hosing, clamps and adapters around $280....
I'de recommend DIY after having a closer look, the Provent alone is about $170 and you could pick up hosing and adapters cheaper elsewhere.
Bunnings have...
A couple of valid points there, plum back seems like the sensible option then.
How effective are the forefront industries catch cans?
Virtually no oil soak returning to the turbo and intake?
How much oil do they collect between services?
The washable filter sounds good.
Just wondering who is running catch cans out there and what types are working well?
Not sure whether to go for a eBay catch can and vent to atmosphere or if I return to intake probably run the Provent filtered system which will be a much more expensive exercise.
Hi all,
I'm looking into painting my S1 D22 and was wondering if I could buy all the panels from a S2 D22 and bolt them on rather than painting as mine is pretty busted up.
Bonet, doors, 1/4's, headlights, grille, the hole lot, has this been done?
Probe is in the middle of the port, pre turbo
Haven't played with it at all, initially wound it in 2/3 and was running about 250 around town
Left it there to see how it went on the freeway which was 250-350
So being pre turbo it's probably safe to leave it where it is and turn the alarm up to...
Hi all,
I've recently turbo'd my QD32 running TD27 gear and 2 1/2" exhaust
EGT probe is located in the old EGR port of the exhaust manifold
Just wanted to ask what sort of temp everyone is running
I've got my alarm set for 500 degrees ATM but it seems to want to sit
On about 515-520 up big...
I bought an 80 series airbox to mod into my d22
Water catcher and one mount is cut off
Still need a diesel lid
I've decided I can't be bothered finishing it
Just want my money back
$60 northmead
Message me for pics
0433 373 721 Jesse
Hi,
I'm after a 80 series airbox for the D22 mod
(bottom of a petrol and lid from a diesel)
I've rung a few wreckers but im looking at about 250 combined.
Anyone know of any of have a spare?
Thanks
I was wondering the same thing Christian, the TD27 i took parts from is the same as that picture above but my QD also does not have that other squiggly metal line.
I will check that the oil pressure outlet has pressure before fitting up, but you have got to wonder what that squiggly pipe does...
I took some pictures which may be useful to you as i struggled finding consistent info on which coolant and oil galleries to connect to.
These are the locations from the TD27T which i plan on using.
[/url]
screenshot[/IMG]
The banjo on the top of the oil filter housing is the oil pressure feed...
Where abouts in Sydney are you?
I'm in Castle Hill and looking at doing the exact same thing to mine in about 2 weeks, I'de be happy to help out/exchange info.
I've stripped all my parts from a TD27 (manifold, turbo, coolant and oil lines and fittings, airbox, intake) and was hoping to just...