Recent content by maggot3064

Cheers guys! Thanks for ya honesty!

Hey guys been thinking of selling the nav and was wondering if ya's could tell me what ya think it might be worth? Well it's a 02 d22 str with 143k on the clock and is serviced every 10k, it has the following items. Arb bullbar 9inch hid spotties 265/75/16 maxis At with about 90% tread left...

Sorry to bump an old thread, but I'm going to put a 300watt inverter in my tub and connect it to my 12v Anderson plug that is already there. The inverter is going to run my waeco so just wanted to know do I have to put a fuse between the Anderson plug and the inverter as I already have a 40amp...

Sorry to bump an old thread, but I'm going to put a 300watt inverter in my tub and connect it to my 12v Anderson plug that is already there. The inverter is going to run my waeco so just wanted to know do I have to put a fuse between the Anderson plug and the inverter as I already have a 40amp...

Shouldn't be any brackets it bolts straight onto the chassis! Mine has 3 bolts either side holding it on

Do you have your fridge running off the battery or the inverter?

So tony let me get this straight you have the battery charger running the whole time connected to the inverter while it is charging a battery in your tub is that what ya saying?

Also I just remembered I didn't use any gasket goo! Should I have?

So I just done this mod today, and I must say I'm not sure if there was much point in doing it. When I took the original gasket or what ever you call it to put the blanking plate in it looked brand new! I was expecting lots of carbon build up on it. It does shut off more smoothly now but I...

Hey guys trying to get my head around this! Once you swap the hoses around will you end up with bits of hose left over or should they all be used when the have been changed? Cause when I look at it ( the engine) It looks as if their would be nothing connected to the black solenoid?

I fitted 1of these snorkels yesterday and it was the biggest c&$t of a job ever! The pipe that runs on the inside of the guard kept coming off I ended up with more sealant on my hands then the bloody joints! And if anyone is going to install them the main tool you will need is a ratchet spanner...

No worries! Thanks for the help boys! Cheers Chris

Ok well thereis no fuse in the cable any more cause I changed it to an Anderson plug. Should it matter?

Cheers

Hey guys sorry to be a pain in the arse but can any one confirm to me that the 40amp breaker isn't too big for the cf-35 I'm running? I was told on the weekend that it may be way to big? Cheers chris