Recent content by MickDooit

I didn't read all the posts, so I can't say if anyone else has done the same, but I had this problem, again it's one of those things you don't really look for, but after warranty had run out, I noticed this, it's really shit, however there is a cheap and easy solution that will last instead of...

Ox, the rattling, does it spun tinny? It's probably your brake lines on your firewall. I had that too. The pop out of the clips. Directly under the brake booster the lines rub down the wall. Look up and you'll see the rigid lines and they may be popped out of the clips around the same area as...

:pissedoff: So I'm putting this out to see if it's happened to anyone else before. I have noticed recently that my car had a clicking sound when powering and backing off, I was told that was indicative of universal joints, so i bought some new ones and installed them, thanks to people's advice...

i have another option to solve it mate. i had this problem the other month with my passenger side door, the cable inside that links the two handles was snapped at one end, so the door catch wouldn't actuate. it's fixed now, thanks to me, i opened up the door and fixed up the little cable. if...

Hey Ryno, could you give me a little more info on this mate, I have a clicking sound coming from under my car, I think it's the unis based on the symptoms and a rough diagnosis. Where did you get the replacement unis and how did you do the change over? My unis are attached to my driveshaft, are...

Hi all, I had done the EGR mod, and then recently, when I had some work done to my car, the mechanic mentioned to me about cleaning out the EGR, i said, don't worry it's blocked, he was a bit stumped as to why, but when I explained why, he told me, that the excessive build up in the EGR was the...

Hello guys, Cam anyone offer me some advice on why my alternator bearings have blown out of their race? Has anyone had this happen to them? Do you know if they are replaceable? If not has anyone got some pointers on where to look for a good aftermarket one? Cheers Mick.

Thanks Jeff, I actually got a letter from Nissan today saying they'd replace my wheels for free (Under warranty/ recall as they have cracked), I'm going to see my dealer and get the wheels and get them painted I think. Hopefully they'll let me do it.

thanks for the feedback guys, took me a while to get back to a PC to see the photos properly but they all look nice, I like the Allied wheels rims, they are cool, I might have to try out a set of them.

Hi Tony, In my frustration it didn't occur to me to check with the dealer. I did and it appears that it's the fuse box that isn't listed in the standard manual. In all of my frustration I'd forgotten about it. It was jammed closed and so I thought when I went to open it, it was something...

I can't find it where is it, I'm using the original wiring loom and fuse, put a pair of 55w fog/ driving lights in and it blew last night, any takers for a suggestion I feel like I've checked everything.

You're right in thinking the fan might have pulled forward, that's a main factor in a wading bra for cars. You're lucky you have a D22, if it was a D40 chances are you'd have ruined your airbag sensor module as well. They are positioned ridiculously low. If you can't get your radiator...

Thanks guys, I think I'm going to stick with a paper, I'd love to improve my airflow a bit more but I think I'll just try and get a bigger one into a custom box first then go from there.

Thanks for your input. Have you noticed any build up of oil (from the filter) on the AFM behind the filter? After a long series of problems with the sensor previously I'm paranoid about it screwing up again. Did you notice a difference in performance?

Thanks guys, I had a guy in an AU Falcon clip my other wheel, so that's two I can get replaced... But I still wouldn't mind a different set on my car, something a little more interesting, perhaps in black. I'll search around and see what I can see.