Recent content by mtbrider4life

yea mate thats right =)

well thats a bit dodgy lol. ok cheers mate =)

Gday guys. I had a pair of new Tough Dog 41mm foam cell shocks installed in the front of my 2004 D22 Navara and have just noticed that when the front end is at full down travel the upper control arms hit the shock absorbers. Just wondering if anyone else has installed these shocks into their D22...

yep as 180degrees said, i cut the end of the bullbar under the flares. i cut around 1.5" of the bullbar, just making it line up with the next line in the flare. Looks prety factory that way =)

180degrees: Cheers mate, yea i rekon they should too! im not sure how far back that TJM bullbar goes, but if you look at my pic, where my bullbar ends is completely sufficient room for the tires, so you would have to check the bullbar out on a car to tell or get out the old trusty measuring tape...

As you can see, a slightly cut bullbar with a 2" lift all around =)

Gday guys, I want to get some new sunraysia rims for my 2004 Navara, id like to get 15x7" but ive heard some offsets dont fit over the break calipers. Ive also heard that a +10 offset will fit. Has anyone had any experience with this problem ? your help would be greatly appreciated =) cheers

Ive got a standard 2" suspension lift both front and rear in my Navara. It has 285/75/16 mickey thompson tyres on the factory 16X7 alloy rims. ive taken the front mud flaps off and had to cut about 2"s off the bullbar so stop the tires from hitting. I havent got any body lift, just a 2"...

gday, Ive got a 2004 d22 navara str 3LTD and im going to buy a front arb diff lock to put in it. Ive been told that i need a 29 spline but i just want to make sure before spending the money to buy it, if anyone knows what spline i need for the front diff i would really appreciate your help. cheers

cheers mate =)

Gday, i have a 2004 d22 navara str 3LTD. I broke the front diff in it and am seeking a replacement, but i need to know what the diff ratio is first, is anyone able to help me out ? Thanks in advance