Recent content by Navbag

Hey guys, just wondering if anyone has replace the pulley/clutch assembly on the front of the a/c compressor? Makes a pretty bad noise when its cold. Thanks in advance

Greg from prg is unless to deal with took forever to get the kit here(brisbane), my front coilovers top out and greg wont do anything about this. I would go monster rides.

Will do. Got pulled over for a rbt the other day and transport were there and they saw my ucas straight away. Didn't fine me or anything just let me know.

Awesome thanks guys I have a PRG kit in mine and it doesn't offer 3" of lift as its meant to and tops out so once I get the coin together will be getting a pair of monster rides Anyone know where to get ucas engineered in Brisbane/Ipswich area

Awesome thanks guys I have a PRG kit in mine and it doesn't offer 3" of lift as its meant to and tops out so once I get the coin together will be getting a pair of monster rides

Hey guys just wondering if anyone has the front coilovers of Monster Rides in their Navara? I currently have PRG's radflos in and am not happy with them. Just want to know how they go on and offroad? Do they top out at all? Would be going the progressive rate coils too. Thanks

Yeah I've talked to Greg, going to have to put a 22mm spacer in the front as I can only get 2 inches of lift from the coilovers that I got for some strange reason. Which sort of sucks seeing as I wanted a 3" suspension lift but Greg says there is no other coilovers and he is making and sending...

Yeah I've talked to Greg, going to have to put a 22mm spacer in the front as I can only get 2 inches of lift from the coilovers that I got for some strange reason. Which sort of sucks seeing as I wanted a 3" suspension lift but Greg says there is no other coilovers and he is making and sending...

What lift and tires? Looks good mate

Thanks guys, yeah ill measure the droop i get tomorrow but might have to wind down for fraser island and maybe a spacer just to have the truck sitting close to level. I bought the kit thinking that it would sit level but it definitely does not. Where can i get a spacer from? Just need one...

I'll let you know the results, but Greg probably will take a week or so to reply depends how busy he is.

Received an email back from Glenn and informs me that my coilovers have no internal spacer that can be removed and my only options are to get Greg from PRG to exchange them or spacers which I dont want spacers due to the legalities. I did initially ask for a kit that would give me 3" of lift...

I get thuds over bumps and I have radflos and prg uca's

Glenn from radflos emailed back just gotta send him a couple of pictures and he'll be able to tell if the coilovers have a spacer inside them. Would be worrying about snake racing the bloke doesn't seem to know enough.

Simon from snake racing seems to think that my cv's and steering would be maxed out at 3" lift and has seen plenty of failures from this type of setup. Little bit worrying anyone else have a 3" lift in there d40's on this forum?