My adjuster stripped the splines about 2 months ago, the torsion bars were inserted properly and circlipped, but they were wound up and had done nearly 250000 miles. the spline runs right through the adjuster so if you carefully grind out the indexing tab and do some welding and grinding you can...
They've only had Pathfinders here since 05 I think, and they all seem to be 2.5 DCI versions.
To get the 3.2 I'd need to buy one of these ugly Elgrand things, and they're not cheap.
Yeah, we don't have many jap vehicles, and the ones we do have are crap because it makes the compulsory insurance cheaper.
Have a look on ebay.co.uk and see how few toyotas and nissans there are compared with citroen, renault, peugoet, bmw, vw etc.
Sorry I meant QD32. We dont get them in terrano's over here though, they came in homy's and elgrand's which are imports and rwd only.
Terrano's here come with TD27t as does the Ford maverick which is essentially the same vehicle. I can get one of these fairly cheap.
What I want is something...
I'm starting to get fed up with my Td25's lack of power. Just wondering what engines will bolt straight in?
Does the td42 bolt to a td25 gearbox? I dont mind having to make custom engine mounts or cut inner guards etc but I dont want to mess about with any common rail drive by wire bollocks...
dunno about shipping from oz but i've got a few bits from the usa recently and after shipping, customs duty and vat are added it usually works out double the price of the item to begin with.
had some gumboots sent over from nz a while ago as they dont have them here (they have wellingtons), and...
Oh, I've also installed a new blower motor for the heater after about a month of scraping ice from the inside of the windscreen.
I couldn't find a navara one anywhere without paying $$$ at the main dealer so I took a gamble and bought one second hand from a pulsar gtir.
Luckily, it's a perfect...
Fitted the extended shackles yesterday, below is a pic showing them compared to standard.
The leaf springs now seem to be a little flatter and harder, which is quite good as the front is pretty hard with the torsion bars wound up.
Overall it seems to handle really well now. It still needs a...
I've done some research, terrano's only came with a td27 turbo over here. Same engine as fitted to ford maverick's.
Nissan Homy's came with the 3.2 turbo, but they are extremely hard to find over here, there are very few cars over 10 years old.
The Nissan elgrand has the same engine but are...
The 93 box bolted straight in the 01 chassis and both front and rear driveshafts fit without any hassle.
There was a difference on the input shaft between the 93 and the 01, they have same number of splines but the taper and spline length is different.
This is why I ended up using the 93 gearbox...
I found the resistor, its not in the airflow but it is near the blower motor. Its fine anyway, I have traced the problem to the blower motor itself.
It still works on all 4 speeds but you need to give it a bit of help to get started by spinning the fan.
i have tried to pull the motor apart to...
Here is the new rear valance. As I said earlier it is made from 10mm alloy plate, panel steel would have done the job but I had the alloy plate and thought why not?
It actually has the transfer case from a 93 D21. Dunno if this is good or bad? It works which is all that matters at the moment.
I have a spare 01 gearbox/transfer case, clutch etc If anything breaks. Most parts seem to be the same or similar.