Recent content by trev08

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    550 intercooler

    ARE cooling make high Quality gear. http://www.are.com.au/Inter/NavaraTopMount.htm $895 not cheap but quality rarely is . Cheers
  2. T

    What oil's are you using ?

    The Dealer put Nissan 5w/30 c4 oil in my 550 and I was surprised that it was only $53 for 5L, and they gave me the other 5L container with the left over oil for its next service. All the C4 oils I have looked at like Valvoline Synpower Mst ect are $65 plus for 5L. Nissan have a supplier deal...
  3. T

    Info on sevicing your own V9X

    Thanks PeterLeo1. I have completed my first oil change on my 550 today and have added a few points for anyone interested. 1. The oil filter access is tight to say the least, unless you have an arm of a 10 year old boy removing the oil filter access panel is a waste of time, you...
  4. T

    Info on sevicing your own V9X

    Hi PeterLeo1, Did you have to remove the whole stone guard / bashplate to get to the oil filter ? It looks like a bitch to get at. Re sump plug key I found this one...
  5. T

    Manta Performance

    Price on Stx 550 version for me thanks. Any pics of the exhaust . Can you do remote tunes for the 550 or do you need the vehicle. Cheers
  6. T

    Radflow 2.0 coil over feedback

    Aussie Frontier, Thanks for that info. The million dollar question is how much heavier is the V9x I was thinking the 600 lb springs, but not 100 % sure. :cheers!:
  7. T

    Radflow 2.0 coil over feedback

    Hi Guys , I am looking at a set of Radflo 2.0 coil overs for my Stx 550 and need some feedback from guys with these fitted. A few questions. What's the ride like compared to Oem ? What spring rate did you select ( 600 lb standard ) to suit the V6. Are they worth the extra coin compared to...
  8. T

    V9X intercooler to turbo pipe replacement

    Yeah you could go that way. I still think cutting the inlet & outlet tanks off and fitting a new core would be the way to go as fitment would not be an issue. ARE cooling do this on older model Navara's, not the 550 yet. http://www.are.com.au/Inter/topMountIntercoolers.htm Cheers
  9. T

    V9X intercooler to turbo pipe replacement

    Not sure if anyone has done an aftermarket inter cooler for the 550 yet. I did read somewhere that ARE in brissy I think where looking at doing a core replacement on an exchange basis , but not sure if it has happened. Plazmaman would be the other option but as far as I can see they haven't...
  10. T

    Micks HID Projector Retrofits

    Hi Mick, Do you have any pics of 2013 D40 Navara lights with the Stanley projector Kit fitted. Cheers Trev
  11. T

    Newby 550 price guide

    Suttons Chullora, so far so good. Not sure about servicing as I live about 100 km away. Cheers
  12. T

    Anyone used "lockstraps"??

    Hi Baylock, I have a set of lockstraps and can recommend them for a bit of extra security. I purchased mine in the US from http://lockstrapsstorefront.com/index.php?route=product/product&product_id=59 For about $90 us posted to my us post box. Not sure who sells them in Aus but like most...
  13. T

    Newby 550 price guide

    Hi guys, I have finally joined the 550 club, MY 13/14 compliance $61k inc Hardcover and tow bar . Pick it up in about a week. A set of Bilsteins will be next on the list. :cheers!: Guys
  14. T

    Newby 550 price guide

    Anyone ???? Not trying to start a "I paid less than you" war , just after a ballpark figure. Pm me if shy :cheers!:
  15. T

    Newby 550 price guide

    Thanks Adam777, I am glad I am not the only one who thinks Nissan dealers are a bunch of:wristy: It took me 3 dealers to get a drive in one ! Suttons at Chullora have been advertising 2013 550s for $54 drive away but I haven't actually been there yet to check if they have any in stock. This...
Back
Top