Search results

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Bashplate Drawings - Make your own

    Will be fitting them up this weekend guys so should have all the photos early next week.
  2. S

    Bashplate Drawings - Make your own

    Josh could help me build cabinets n my study and ill give him one heh
  3. S

    Bashplate Drawings - Make your own

    I believe so mate I dont mind if josh does them I was just trying to get the price down a bit for you all.
  4. S

    Bashplate Drawings - Make your own

    What series cruiser Gazza? We did full protection out of armour plate for a latest one for the defence force in Iraq this thing had 200mm ballistic glass for windows costs about 100 grand if your keen :)
  5. S

    Bashplate Drawings - Make your own

    As an idea on price this what price.i get on 304 and 316 (changes monthly) 304 3000mm x 1500mm 3mm is about $470 316 3000 x 1500 3mm is about $ 700 On a 3000 x 1500 sheet you can fit 2 sets from memory without looking at the nest and it will.take about 30 minutes to cut ( with my vented...
  6. S

    Bashplate Drawings - Make your own

    will do, we arent a machine shop so will not be able to supply special made brackets but i can advise what is needed and where to get it(if anything). Ill probaly just knock anything needed up with the welder in the shed.
  7. S

    Bashplate Drawings - Make your own

    yer i only have access to a thai built so will fit it up to that but will probaly do it differently to the nut on a wire but will see how it goes.
  8. S

    Bashplate Drawings - Make your own

    Guys im going to be cutting my brothers ones on monday i have made a slight change to the main design to allow for a bit of airflow. If anyone else wants one please let me know and ill grab a deposit or something off ya. Im going to be cutting my brothers out of 304L stainless steel so i will...
  9. S

    Bashplate Drawings - Make your own

    correct you are gazza i meant to type molybendum but was discussing copper at the time so thats what got typed my mistake. Its up to you guys but im sure they could be posted with auspost, we send everything by TNT but i think that could be a bit expensive for 1 off's so i could just drop them...
  10. S

    gday

    I dont have a nav my brother just bought one, I have an 07 triton. Im a laser.cutter by trade so if you guys.need parts designed or cut/ bent let me know. I live on the northside of Brisbane
  11. S

    gday

    Howdy guys i am new to 4 wheel driving and love learning everything i can about them so i have signed up to the forum. done alot of reading so far so thanks for all the info
  12. S

    Bashplate Drawings - Make your own

    the weight differences between all of these will be minimal to work it out there is a simple equation stainless steel is 8.3 density so length x width x thickness x 8.3 = so for example the tranfer gaurd would be 0.660 x 0.482 x 3 x 8.3 = 7.9 kg's (not excact but close enough) Mild...
  13. S

    Bashplate Drawings - Make your own

    ok guys for the 304 stainless steel ones sump guard 304 stainless steel 3mm $ 200.00 Transfer guard 304 stainless steel 3mm $100.00 If you want both then i can get another both for $280 plus postage or you can pick up from warner. in 316L stainless steel which is more resistant to rust and...
  14. S

    Bashplate Drawings - Make your own

    weight wise there is not much difference mild steel is 7.88 density and this is about 8.22 so the difference is not to much to notice. But the strength of it is ridiculous it is what they use for defence vehicles and we even cut all the parts for the UN cruisers around the world. It will be...
  15. S

    Bashplate Drawings - Make your own

    Yer I can press it for ya I drew it up today so ill get onto it tomorrow how many people would be interested. I can do them out of any material ya like.also 3-4mm stainless (what I would use) mild or hardened armour.plate which would.never bend or break ( what I use on my truck but its more...
  16. S

    Bashplate Drawings - Make your own

    Guys if you want me to give you a quote on cutting these for you i am happy to as i work for a brisbane based laser cutting company and can probaly do a better price. send me an email at [email protected] and i can sort something out.
Back
Top