Search results

No instructions with mine But iron man have a video tondo the torsion bars And most of the other parts can only fit one way Sent from my iPad using Tapatalk

threw a 2 inch raw lift kit in last weekend then gave it a quick wash need to crank the front up a bit more work has been crazy and still need to get the snorkel and winch in to it

awesome! I'll wind them up a bit more then get a wheel alignment. do the fronts take long to settle?

so put it in on the weekend got 565 in the rear only at 540 in the front but think I need to wind the torsion bats up a bit more I have about 27 - 30mm on the lower bump stop and about 20 at the top, slightly different each side. I should be able to get a bit more oUT of the front safely...

got the medium loads as I don't have much in the tray and when I do only a motorbike or two will take bottom of rim (stock) to high point in guard

awesome, I'd seen that video somewhere before but couldn't find it again. Will keep an eye out for the circlip trick, happy to do the measures and turns as well measure from center of wheel to highest point of wheel arch?

Hey guys My kit just arrived today Any tips for the install, special tools required etc? Haven't don't torsion bars before so would appreciate any pointers you guys have. Cheers Faz

The winch

Well I should be putting my snorkel on rather than tinkering on other things, but I get sidetracked very easily. Pulled this warn winch off the old family pajero. Rated to 9000, think it's xd9000 but could be easily wrong. Contol box isnt working properly so checked it straight off the...

Finished the behind seat box today

Finished the box today by puting the headrest channels in.

Ill get a photo of the box, ive painted it and nearly done. Just need to route some chanels for the headrest to get it to sit back another 10mm

Sounds pretty good to be honest Good value for money, doesnt shake the windows out but is more than enough for me

Its not a monster, but certainly adds alot of bass and more depth to the stock system

Im in hawthorn, heading to a wedding today but will be in touch!

Signal wires spliced into loom and run back under the trims to behind the seat

I decided that I would run the powered sub from jaycar,8 inch for $129. This uses rear speaker wires for signal to run the sub. Then power to the battery and an accessories trigger to turn it on / off So I am making a mdf organsier and speaker mount

Well I had been having trouble finding answers on hear about newer model d22 rear speakers. So after some mucking around here is what I found in my 2014 plated d22 When you remove the b pillar trim, 2 phillips head screws at the bottom, and then I hard pull will remove the clips reveals the...

Im more keen on a hole saw than a jigsaw... Will keep you guus posted

Can you pull the suspension out and put the stockers back in?