Search results

I'm doing a cylinder head on a Suzuki Jimny 2011 at the moment... Naturally, I turn to suzuki for their head torque specs when I see this: My understanding is you go around 4 times, the last two being 60 degrees each? (120 degs total). I've used plenty of TTY bolts before, but never seen this...

Hi, Does anyone happen to know the differences between the flywheels and clutches on these engines? a TD27 HD clutch kit is half the price of a QD32... but... The specs seem the same according to the navlife shop, and most of the other engine parts are interchangeable... 250 dia 25.5mm spline...

Hi. Does anyone happen to know if these can be removed without taking the head off the engine? If you could try to get one out with a magnet at your next valve check I would be grateful. :) Cheers

Cal offroad... Unfortunately the previous owner of my D22 fitted it out with their UCAs... Their parts are all ridiculously overpriced... 200 for UCA bushes... 95 each for ball joints. Well. Not all hope is lost. D21 ball joints (4 bolt) bolt straight on. Just sharing my discovery. I picked...

Hi. I'm chasing either a TD27 turbo injector pump, or the same one from a BD30. Must be full mechanical. cheers

I'm chasing an inlet manifold, top mount OEM intercooler and rocker cover from a TD27, but it seems pretty hard to get hold of. Does anyone have some to sell, or have any suggestions on how to get the stuff? Cheers.

Has anyone got any information on converting a mechanical non-turbo fuel pump to a boost compensated one? I currently have a TD27t fuel pump on the way, and the plan is to simply fit the boost compensator to the QD32 pump. This would give me the larger pump piston, with the addition of lovely...

As titled (maybe even fits ZD30? Check first) I bought this starter motor this week thinking mine was toast. Turns out I just had a snapped battery terminal. Yay. So now I have a brand new starter motor as a spare. It's been fitted, so I can't return it, but it's in brand new condition. $100...

brand new set of crank main bearings left over from a rebuild kit (Taiho brand). Standard size $50 for whoever wants them. Still sealed in internal packaging and untouched.

Converting an aftermarket turbo QD32 NA to QD32ETI internals. Information for people wanting to do this: QD32 with an aftermarket turbo commonly results in a cracked piston or two (check for wrecking vehicles, it's almost always the case). In before comments like "well mine has been turboed...

Has anyone headed over there in their nav? I was checking out their fees etc for the ferry and there’s 2 applicable: Standard 4wd - $175 Large 4wd - $200 Which one does the nav fall under? I’ve got a D22 Final question is, what is the cost of the vehicle permit/camping on average per day...

So I went out for a bit of a play t'other day. And when i got home I noticed the old girl was a bit saggy in the front... Had an investigate and found the problem. Those donut things on top... One of them crushed a little bit. The other one a lot. Meaning muchos wheel rub and a lop sided...

As titled. If anyone has one, let me know, as I'm trying to hook up a TD27 intercooler to my QD32. Cheers :)

So I'm just gauging this up as to time and effort etc. for when the time comes. From what I've read, people say it's a c*nt of a job, bla bla, need jacks and tools etc. But from my experience with the QD32 most of it is chinese whispers and it's easier than the "forum gods" make out to be. In...

Has anyone got any info on swapping the early 97 D22 headlights (square ones) with the "newer" rounded ones? Cheers

Not so much a "classified" as it's swap, not sale. Basically the situation is this: I have a water to air setup that came unfitted with my car, but it's too problematic to fit (it's a QD32 with a big-ass plenum). I'm after a same-side intercooler that I'll do a swap for. You'll be getting a...

As titled. No cracks, damage or warpage please, need something I can bolt on and go. Cheers

I thought I'd do a write up of this as I've searched for ages, and found very inconclusive stuff relating to the QD32 engine in the navara. Lots of stuff relating to the 2.7 engine, but this is a very different block. Set the scene: I had 0 compression on cyl. 4 (at the back). What do you read...

Does anyone have experience with these manufacturers/suppliers? They seem to pop up very frequently with my searches but I'm a bit suspicious. I'm considering ordering a piston and gasket set from them. Should I avoid?

Hey! Finally got around to tearing down the 0 compression cylinder 4 on my car. I've actually never been so happy to see a cracked piston! No head damage No liner damage. Can and will be repaired in situ. The question is, I'm trying to determine the pistons before I pull them out. I've...