Search results

I had a better look at the situation today but no good. I've found that the fluid is getting trapped under the rubber boot and spewing out when pumping the pedal. I can't figure out why it's doing this it could be a bad slave cylinder? Any tips would be greatly appreciated! Cheers

Yep that's the way i do it. Although the first time I tried to bleed it, I used the hose with a valve on the end I think it might be called a "visibleed" or something along those lines? I'm not exactly sure because I didn't buy it. But I think the valve on the end could've been a bit stuffed...

I'm putting fluid in the master cylinder, loosening the bleeder screw on the slave cylinder a tiny bit until fluid drips out and I then tighten the bleeder screw again and attach a hose that leads into a jar half full of brake fluid. I then pump the clutch very slowly until only fluid and no air...

Hey there, Does anyone have any tips on bleeding a clutch? I've been using the old method with a piece of hose going into a jar half full of brake fluid but to no avail. There doesn't seem to be any air in the line as solid fluid is coming out but the clutch is still extremely soft. Anyone have...

Alrighty thanks, I downloaded the D22 service manual I'll have a look at the brakes tomorow. Thanks for the help I'll let you know how I go. Cheers

Hey fellas, I need some help adjusting the hand brake cable on my D21, it's extremely loose to pull up and it definatly won't hold the ute on a hill. I've found the adjuster under the car but it's as tight as it can go. I'm not sure what else to do to get it any tighter? Any thoughts? Cheers

Hey there, I recently replaced the clutch on my D21 and got the transmission and everything back in all lined up and bolted to the engine. But upon installing the crossmember under the transmission I've realised that the bolt holes aren't lining up to attach the transmission to the crossmember...

Yeah mate those were my thoughts exactly I've been googling a bit to see if they do exist, havent found any evidence yet though!

Hey there, Just a question regarding extractors, Has anyone got them/tried them out? I'm thinking about getting some for the ol' sd25 I got. Anyone had any experience with extractors on this type of engine? Would they be worth it/not worth it etc? pros and cons of them? Just wanna know what the...

Dave Matthews band shake me like a monkey YouTube - Dave Matthews Band - Shake Me Like A Monkey - Song Debut Love it

I'm sorry to say I have the Bieber fever!...NAWT jokin jokin dont flame too much :p Nah I'm doing a bachelor of music at uni so my tastes are diverse really been getting into some funk stuff lately, Tower of Power, Brian Bromberg (bass player) also straight ahead rock don't mind some pearl jam...

oh alright I wasn't sure what the go was if they came with a tray or tub from the factory new, I thought it was a tub but wasn't quite sure. Thanks for the help

Does anyone know if a dual cab d21 tub will fit easily onto a dual cab trayback? I imagine it should fit pretty snug and be a simple change over but I could be wrong. Any thoughts? Cheers

Good stuff, Thanks for the download Dion that's a big help, I'll have to try and give it a go when I have time (go back to uni this week). I'll try not to stuff it up when I do it, although it seems pretty simple. Cheers and thanks!

Thanks guys, Yeah Pinelli I think i might need some new seats aswell in the near future i imagine that would help alot with comfort. I don't have a camera at the moment so can't post any pics which is a bit annoying! But anyway the block I'm talking about is one that is in between the axle and...

Good stuff I'll have to shop around for prices and all that jazz in the future (need some money first :p) I've noticed there's some blocks welded to the axle under the leaf springs at the rear that look like they've come stock from the factory is that normal? Would it be some kind of lift or...

yea I was thinking maybe replace the torsion bars as you said it most likely raise it a bit which is what I'm after. Cheers

Hey there, I was wondering what everyone's thoughts were on lifting a D21? I have a 86 Navara and the front suspension is sagged pretty bad and its really rough to drive both on and off road. I was just wondering what would be the best/relatively cheap way to lift it/get a bit more ground...

Thanks, I cant seem to find the switch, I've looked under the vehicle and tried looking under the rubber near the 4x4 shifter but can't find anything that looks like a switch. Is it the type of switch that can be pressed and turned on and off manually or something that is a bit like a sensor? I...

Thanks for the info fellas! Thanks Tango that would be great unfortunately I don't have the funds right now but I definatly want to try and get some in the future. Cheers