Search results

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bob_the_welder

    engine rattle/noise @ 2600rpm

    shorty, was the filters mate, picked up a ryco in Weipa and no more probs, only thing was I had 3 spare shit ones, also im running a 80 series box, got rid of all standard hoses.......6 months after I spent $340 replacing it, all silicon and stainless now John, thanks mate, hopefully nothing too...
  2. bob_the_welder

    engine rattle/noise @ 2600rpm

    nah not a squeal, I haven't checked turbo yet, I was originally leaning towards timing chain but the wife kindly reminded me of the shit filters up the cape, she didn't ingest too much was only ultra fine powder, just a fine red dusting in the lid of the airbox. after towing 2 ton 22,000km...
  3. bob_the_welder

    engine rattle/noise @ 2600rpm

    gday all, just wanted a few ideas/feedback on new noise in my ol ZD30. Im running a crosscountry cooler and a 80 series airbox but all that is unrelated cos we have done a 22,000km lap of Aus towing 2ton of camper with the changes. couple w/e's ago hooked up the camper and headed off, on way...
  4. bob_the_welder

    ZD30 Fan same as Zd30 Patrol?

    just noticed my fan has suddenly developed stress cracks, is the zd30 navara fan the same as the zd30 patrol fan? thanks
  5. bob_the_welder

    Another diff breather question

    thanks, basically what I was thinking, ill just play it safe and run another full line for diff. thanks again
  6. bob_the_welder

    Another diff breather question

    Yep, another diff breather question:sorry3:, and it probably doesn't require a new thread but I got sick of reading. Doing the big lap in a few months and im replacing my rear diff breather again cos I got it snagged and fecked it all, question is instead of running a line all the way up to...
  7. bob_the_welder

    D22 EFS 2in lift rear springs

    FOR SALE, 1x set EFS 2in lift rear leaf (medium) springs, done that little work that the SuperPro polly bushes I fitted them with are unmarked. can have bush set too if wanted. $180 where is as is. Location Toowoomba QLD
  8. bob_the_welder

    Comment by 'bob_the_welder' in item 'Nissan - Navara - 2004'

    2004 Nissan Navara (2014-01-25 09:28:37)
  9. Nissan - Navara - 2004

    Nissan - Navara - 2004

  10. bob_the_welder

    Landcruiser 80 series airbox into d22.

    its only a air temp sensor and I just put a 19mm hole in the inlet of the airbox and using original grommet relocated it, plenty of wire length, just unwrap harness and retape, see pic.... nope crankcase breather on lol, even finally got around to fitting a catch can.
  11. bob_the_welder

    Landcruiser 80 series airbox into d22.

    thought id pop back and after nearly a week of driving the vehicle my initial observations hold firm.....AWESOME! more torque at even lower revs, better pick up (even less turbo lag especially on hot days and on boost just off idle now), and got rid of 90% of weird induction type noise after...
  12. bob_the_welder

    Landcruiser 80 series airbox into d22.

    just done the 80 series airbox swap so I thought I would post a few pics, actually relatively easy swap, well done to the person who originally thought of it! and before anyone mentions it I know that the extra couple bends between airbox and turbo isn't ideal but it allows me access to both my...
  13. bob_the_welder

    Replacement NISSAN snorkel badge

    sweet, thanks
  14. bob_the_welder

    Replacement NISSAN snorkel badge

    hi all, was wondering if anyone would know where i could get a replacement NISSAN badge for my factory snorkel, cos i aint goin back into the lantana to get mine! Cheers Dan
  15. bob_the_welder

    Alternator light keeps coming on.

    Goldie, sounds very similar to what mines doing, same year model too lol. didnt do it for 2 weeks and then fri arvo i started it up at work and it did it. but you can tell when it is going to do it even before motor starts because if you watch the dash as motor cranks the alternator light goes...
  16. bob_the_welder

    Camping setups

    awesome, a camping and fishing section! well thought id throw up a few pics of the camper trailer i built last year. 50mm axle, 9 leaf rebound springs, parallel bearings, alco 10' elec brakes, 265/70/16 wranglers, fully welded chassis, 2200 100x50 drawbar with out board mount, 2ton hyland hitch...
  17. bob_the_welder

    Alternator light keeps coming on.

    Hi all, got a bit of a weird one, alternator light came on a couple times on start up a week or so between each instance, when it stayed on if you gave it a quick rev it would go out.....pretty typical of a regulator starting to give trouble, so after comfirming with my auto sparky i got him to...
  18. bob_the_welder

    Cost Of Filters?

    didnt forget about thread...just busy lol...i get my fuel and oil filters at work, Baldwin fuel and forget the brand of the oil, but come off same production line as the genuine nissan ones...only diff is no nissan stamp and huge price tag lol....cant say how much i pay for em tho lol..but i...
  19. bob_the_welder

    Clutch woes

    yeah nissan can go ....sorry language unsuitable for this forum lol, good luck with it tho
  20. bob_the_welder

    Clutch woes

    mate i think you may have yourself a cactus clutch, sounds like the clutch plate is just plain worn out or more likely the pressure plate has given up the ghost, hard to tell without actually driving it but got the right symptoms. dont drive it anymore, as the clutch is slipping its creatingheat...
Back
Top