Go Back   The Navara Forum > D23 (NP300) > D23 General Chat

Reply
 
Thread Tools Display Modes

Fitting ST-X D23 mirrors to a ST D23
  #1  
Old 06-01-2020, 07:19 AM
Malcolm Malcolm is offline
Junior Member
 
Join Date: Jan 2020
Location: Queensland
Posts: 1
Default Fitting ST-X D23 mirrors to a ST D23

I have bought the mirrors from a 2015 ST-X for the indicators and folding, and tried installing them on my 2018 ST. I can see that my car has all the wiring that matches the mirror, but only the mirror adjustment works, and the RH mirror folds, neither of the indicators work. I also bought the drivers side door control for the folding mirror button.

I've even watched a tutorial for a Clearview mirror installation on YouTube that says the ST and ST-X both have the same wiring.

My model car is early 2018 just before they brought in the surround view which was mid 2018, but I do not think that'll affect anything.

I've tested the mirrors by both using a 12V battery and connecting the pins following the wiring diagram, and the indicators and folding does work. I've also swapped the pins on the mirror from the indicator to the mirror adjustment to see if it'll work from the power of the car, which it did, and the indicator would come on when I tried adjusting the mirror.

I'm not sure if there is a fuse missing or something, I couldn't find anything about it in the workshop manual, so it has me stumped.
Reply With Quote
Sponsored Links

  #2  
Old 11-01-2020, 05:09 AM
amber.2's Avatar
amber.2 amber.2 is offline
Member
 
Join Date: Jan 2012
Location: Robina Gold Coast QLD
Posts: 208
Default

I see there are 2 types on Ebay a 5 pin and a 7 pin which one did you buy ?
I would also like to upgrade to the STX mirrors with the Blinker and folding ,
Has any one else done this mod please share how you installed and activated the procedure
thanks

Last edited by amber.2; 12-01-2020 at 01:08 AM.
Reply With Quote

  #3  
Old 16-01-2020, 07:30 AM
amber.2's Avatar
amber.2 amber.2 is offline
Member
 
Join Date: Jan 2012
Location: Robina Gold Coast QLD
Posts: 208
Default

Looks like Malcolm was just passing by
And im still looking for a solution to install the STX Mirrors with blinkers into my ST,
Does the harness that is installed at the moment have the wires for the blinkers if not ,where is the best place to connect to
Must be some one on the Navara forum that has done this Mod ?
Reply With Quote

  #4  
Old 16-01-2020, 09:30 AM
bods's Avatar
bods bods is offline
Advanced Member
 
Join Date: Sep 2010
Location: Orelia, WA
Posts: 4,947
Default

It could also be a programming thing through the BCM. I'm not sure on the navaras, but I know the au and ba Falcons had low and high level bcms. The low level was for the Falcons and the high level for fairmonts and fairlanes, etc.

If the navaras are a similar setup, the BCM may not be programmed for those functions. I believe to change the BCM you would have to change the ignition barrel and door locks, unless Nissan can program an stx BCM to the st ecu and ignition... What that would cost is anyone's guess...
Reply With Quote
Reply

Tags
folding mirrors, mirror indicators, np300, side mirrors

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 03:15 PM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |