stock d22 gaurd height

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mahooody

Member
Joined
Apr 6, 2010
Messages
150
Reaction score
0
Location
Melbourne
could someone help me out and tell me what the front gaurd height of a stock d22 is. I think my torsion bars need a re-tweak.
 
Ground to guard wont work, needs to be from bottom of rim to guard as the reference is easier between tyre sizes.
So anyone with a new Nav could measure and tell you and it wont matter if you or him has bigger tyres on. ( i think thats how it works anyway )
 
Ground to guard wont work, needs to be from bottom of rim to guard as the reference is easier between tyre sizes.
So anyone with a new Nav could measure and tell you and it wont matter if you or him has bigger tyres on. ( i think thats how it works anyway )
Ill be watching as id also like to life mine a little more up front.
 
Mate

as per the D22 manual, this is where it should be measure and this is what it should be (4wd model)

wa2voZy.jpg


cheers,
 
I think mine was 700-720mm from the bottom of the stock rim to the guard..

Cheers for that ill have a measure tomorrow, i think when i put the new kit in i was at 760 but I'm sure it would have settled a bit since then.
 

Latest posts

Back
Top