Go Back   The Navara Forum > General Discussions > Main Forum

Thread Tools Search this Thread Display Modes

Old 19-09-2018, 10:04 AM
Connaught Connaught is offline
Join Date: Mar 2012
Location: Perth
Posts: 168
My Mood:

timing chain

when i looked at it after replacement it was clearly stretched, and had lots of slop in it, guides where well and truly worn out, down to the metal

like i said, i could hear the swishing noise at idle while it was hitting the guides, the noise at idle after i replaced it was very obviously quieter

cost 4k to get done here in perth, thats a dual row kit, replaced the oil pump and did the egr pipe delete as well at the same time

my turbo has been great, but right now i am at 350k, and doing fuel injectors now

keep in mind i have a 2007 spain built rx, with a ton of km's on it, i am thinking this would be normal wear an tear, both timing chain and the injectors, and the solid mass flywheel and clutch i did at 285k (only clutch it has had i think, clutch was almost worn out, but changed cause the flywheel seperated)

Last edited by Connaught; 19-09-2018 at 10:08 AM.
Reply With Quote
Sponsored Links

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |