D
Help Support Nissan Navara Forum:
shaggy
Member
Hi Dave
Good Info.My nav has to go for a wheel alignment next week when i get my tire rotated so I will get them to check.
Shane
Good Info.My nav has to go for a wheel alignment next week when i get my tire rotated so I will get them to check.
Shane
D
Dave
Guest
A few people asked me what works on mine plus it puts the info in one thread instead of digging through the other thread.
Dave.
Dave.
chucky
Member
- Joined
- Nov 27, 2010
- Messages
- 23
- Reaction score
- 0
dave do you have copy of d22 original specs ?
D
Dave
Guest
Should be in the D22 service manual which you can download in the D22 section.
The other computer has it on the hard drive.
Dave.
The other computer has it on the hard drive.
Dave.
mottleemob
Member
Hey Dave what was it doing before these settings where used
cheers phil
cheers phil
Aido
Member
Irrelevant as a Sticky as all of these Donkey carts respond differently....there are too many variables in terms of torsion bar ride heights and rear leaves - not to mention the +/- 10mm manufacturing tolerances.
04SilverSTR
Member
Just had a alignment done and gave them these specs which they used. The nav feels pretty good now drives straight steering wheel is straight. Thanks dave for posting this up. Also i have my torsion bars wound up 2in as well.
Cheers
bryan
Cheers
bryan
D
Dave
Guest
Glad to hear they worked for you to Bryan.
Shane aka Shaggy. How did you go ?
Shane aka Shaggy. How did you go ?
kus89
Member
just had the alignment done on my 2011 2.5 after installing a 2" doinson lift all round and heres my read out
BEFORE front camber left -0degree 10' right +0degree 50'
front castor left -0degree 10' right +1degree 20'
S.A.I left +10degree right +9degree 40'
front toe in left +3.00mm right +4.40mm
AFTER front camber left -0degree 20' right -0degree 10'
front castor left +1degree 40' right +1degree 10'
S.A.I left +10degree right +10degree 10'
front toe in left +0.40mm right +0.40mm
BEFORE front camber left -0degree 10' right +0degree 50'
front castor left -0degree 10' right +1degree 20'
S.A.I left +10degree right +9degree 40'
front toe in left +3.00mm right +4.40mm
AFTER front camber left -0degree 20' right -0degree 10'
front castor left +1degree 40' right +1degree 10'
S.A.I left +10degree right +10degree 10'
front toe in left +0.40mm right +0.40mm
I know it's true but funny as
