Ironman underbody protection pics?

[Escoutdoors]

Hey guys. Just slapping on ironmans underbody protection. The front plate doesn't line up with any Original mounts. Before I go drilling my own thought I'd check if anyone had installed these to their 22.
If so if you have a pic would be awesome and greatly appreciated. Cheers

 

[RustyNav09]

The ironman plates don't line up on any front mounts. Just drill yourself some holes and bolt it. I have some in my build thread.

 

[NathanJG]

I got zordo to install my ironman plates. I know he didn't have to drill any holes but I also know he was using a hammer a bit to get things to line up!

 

[Escoutdoors]

Beauty guys. Figured it to be the case. What's a couple a holes for $200. Bargain. Cheers rusty ill take a look.

 

[mr1jz]

Are you using the hooks that hang over the diff crossmember.

 

[RustyNav09]

There should be 3hooks over the diff cross member. Then I cut the plate and drilled 2 holes through the bullbarbbracket to secure it on the front.

 

[Escoutdoors]

Rusty
When fixing to the bullbar arms I would assume you used the two 90o brackets supplied???