Media added by zed

Shop deals on ebay
shop deals on amazon
Advertise with us
Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
had to trim the plastics to fit the rear gards

had to trim the plastics to fit the rear gards

  • zed
  • Oct 30, 2012
  • 0
  • 0
IMAG0691 Amazing what you find in the off cuts section of Drouin Steel- both bends came from a roll cage project that was'nt used !The rest is just of

IMAG0691 Amazing what you find in the off cuts section of Drouin Steel- both bends came from a roll cage project that was'nt used !The rest is just of

  • zed
  • Oct 29, 2012
  • 0
  • 0
IMAG0690 The original runners will have their original step vain/brace tact to this! LAzY huh !

IMAG0690 The original runners will have their original step vain/brace tact to this! LAzY huh !

  • zed
  • Oct 29, 2012
  • 0
  • 0
IMAG0689 waiting for her service - dyno tune and lifter shims, i hope it's shims ffs! well it's off for the experts ! if i could find the original fac

IMAG0689 waiting for her service - dyno tune and lifter shims, i hope it's shims ffs! well it's off for the experts ! if i could find the original fac

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0686 all tucked away , tight fit huh !

IMAG0686 all tucked away , tight fit huh !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0687 never did post a finished pic' of pre filter and catch can mounted !

IMAG0687 never did post a finished pic' of pre filter and catch can mounted !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0681 all shinny and waiting for the runningboard/slider bar fit, trying to fit the original boards and plastics over a light set of sliders..

IMAG0681 all shinny and waiting for the runningboard/slider bar fit, trying to fit the original boards and plastics over a light set of sliders..

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0678 cover plate in place

IMAG0678 cover plate in place

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0677 cree driving lights for spread , thanks to snake racing !

IMAG0677 cree driving lights for spread , thanks to snake racing !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0676 spot light mounts , over kill for these little nav' pencile beams "just thinking ahead" ..these where the reversing lights on her when i got

IMAG0676 spot light mounts , over kill for these little nav' pencile beams "just thinking ahead" ..these where the reversing lights on her when i got

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0675 need a before shot but removed 60 mm off the return leanth and re angled the lower section . replaced cover plate on end of bar (fully welded

IMAG0675 need a before shot but removed 60 mm off the return leanth and re angled the lower section . replaced cover plate on end of bar (fully welded

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0674 front bumper reshape , lower gard mod ( trim, seal metel and re mold plastics)

IMAG0674 front bumper reshape , lower gard mod ( trim, seal metel and re mold plastics)

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0673 rubber inner gards !

IMAG0673 rubber inner gards !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0672 recovery gear boxes !

IMAG0672 recovery gear boxes !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0671 wash day , box on left of plate fitting is the ramp box for the bike :) havent used the space behind the number plate fitting , thinking wate

IMAG0671 wash day , box on left of plate fitting is the ramp box for the bike :) havent used the space behind the number plate fitting , thinking wate

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0668 ahhhhh fridge box "tie down " ...and tool box (bolted to floor ) !

IMAG0668 ahhhhh fridge box "tie down " ...and tool box (bolted to floor ) !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0667 stretcher mount ;) oh and the black tie down is for the bike !

IMAG0667 stretcher mount ;) oh and the black tie down is for the bike !

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0662 backing plate for "original tie down point"

IMAG0662 backing plate for "original tie down point"

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0663 power to the people ;)

IMAG0663 power to the people ;)

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0664 s/s mount for winch control box, sleave mount with locking point!

IMAG0664 s/s mount for winch control box, sleave mount with locking point!

  • zed
  • Oct 28, 2012
  • 0
  • 0
mounting point for bash plate- picks up three chassie points on either side plus one also on the support for the "tie down" points at the front (guess

mounting point for bash plate- picks up three chassie points on either side plus one also on the support for the "tie down" points at the front (guess

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0659 recovery point

IMAG0659 recovery point

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0658 cover plate and mount

IMAG0658 cover plate and mount

  • zed
  • Oct 28, 2012
  • 0
  • 0
IMAG0660

IMAG0660

  • zed
  • Oct 28, 2012
  • 0
  • 0
Back
Top