Recent content by scalywag shaun

OK, this thread soon went skwiffy on my part sory. Any way turns out my pump was bad. The timing in side the pump locked up solid. Ie the advanced and retard thing inside. So just had a recon pump fited and all is fine now.

OK, thanks all. Iv now sorted this out. It turnd out to be a dirty oxygen sensor located in the air box doun tube befor the filter. As soon as I cleand it the car ran as it should.

Thanks I'll give it a read .

Thanks.

So this is what I found in this intake system, full up with carbon oil and crud. Now cleaning it out

Thanks for your input, usfull to no and would not hurt doing this stuff. I can add more info to this now as had a code reader put on to the system last night by a friend and he says it's come up with two codes that will not go away. One if for the top o2 sensor the othere is the temp senser...

OK, may be geting closer to the fix on this. After digging around in the engine bay, I have discovered. the temperature censor the bottom one of the 2 has a very loose connection fiddling. Around pushing the plug on and cleaning has now led to the temperature Gauge not fluctuating when revving...

Hi . My 2.5 yd25ddt engine is giving me grief. It's starts, I drive it. Apon driving it hard when still cold it starts to stall out and spit white smoke if I lift my foot of it will run fine. when the temp is at half way it drives fine also. Changed the glow plugs no joy going to do filters...

Thanks👍

Fixed, with out your input I would never have found this problem . Thank you so much .

I was about to ask this, iv just found the Circuit diagram in my manual.and if I'm right them Diodes are in the dashgclaster.clocks. any way thanks I will go read you link . Thanks for your help

Thank you.

So basacly I need to strip the alternator and solder the dry joints , ok no bigy then . Thanks I'll look in to this as soon as I can. Thanks

2 .5 double cab

If iv I Identify the thing right it's got the 2.5 Di, yd25ddti engine .I beleave , if iv got that chasy numbers correct with the work shop book I got the other day