Search results

I have 275x75x16 on my D22 with ghecko 16x8 zero offset and they overhang by about 60mm. haven't had to cover them up yet

I have fitted 285/75/16 BFG KM2 on ghecko steel 16x8 rims with 0 offset and had to remove the mudflaps and trim about 10-15mm off the back edge of the guard. I also have a 2 inch lift (2011 D22)

is yours noisy at all like ckunking etc when you turn

the photo you posted is exactly what happened to mine

I took it back and got it replaced the problem is the mob that fitted the kit say they did nothing wrong, what concerns me is what if it happens again it was ok at 30 kmh wont be so good if it goes at 110. The people at ironman in perth also told me it was fitted incorrectly. everytime i hear a...

I have just fitted an ironman 2 inch lift to my 2011 d22 and now it makes all kinds of weird noises. after a few days the right hand side spline stripped out of the torsion bar adjuster wich was replaced by the so called mechanics that fitted the kit now im too scared to take it any where incase...

I fitted a genuine nissan snorkel to my 2011 d22 . mine has twin batteries and i didnnt have to relocate the blinker, it was scary though cutting a 90 mm hole in my brand new car

BHP /Onesteel for 33 years

only when turning

car is only 6months old and has only been 400 ks up the birdsville track and back and the suspension is only 3 weeks old. noises started after lift kit was fitted. stripped the splines out of the right hand side torsion bar adjuster after 3 days only driven about 30 ks total

new shocks, torsion bars and leaf springs also new bushes, there is also a good 50mm gap between the top wishbone and bump stop

just had an ironman 50mm lift fitted to my 2010 D22 str . first problem was the right hand side splines stripped out of the torsion bar adjuster and now having had that replaced have a clunking noise every time i turn left. I have been underneath and tightened up all the bits the professional...