Search results

I got this reply about a year ago Hi Leigh, we have one QD32 Turbo Manifold left - $299.00 + Regd Mail postage to Victoria $21.00 - Total $320.00 We can also supply the following kit: Nissan TD25, TD27, QD32 Turbo Manifold T3 /T4 Turbo with internal wastegate & 6 pound actuator Stainless...

No, Ute was written off after a truck backed in to it and bent the b-pillar beyond repair. Miss the ol' girl too. I think somewhere else on the forum fitted this kit. I already had my own turbo and was just going to mount the manifold and lines. If you use your D22/QD32 for towing then I would...

All sorted. I ended up using two ratchet straps. One to hold the block still and square and the other to tension the rear of the box rearward. Once this was setup I got a little jimmy bar in between the box/block at the top and shook like crazy and finally they separated. All fixed and back in...

I had the same problem after upgrading to a H/D clutch. Turned out I had a stress fracture in the fork which couldn't handle that little extra from the tighter pressure plate. I have been told this is rare but worth a look

Hi all, Pulling the manual box out for synchro repairs but buggered if I can seperate the box from the block of the QD32. They are obviously sealed/glued together but any movement results in the block moving with the box. Any one got any tips or tricks to seperate the two...

If only that was true. I followed my brother to Echuca from Bendigo and watched as a tyre blew on his dual axles caravan. Which then threw him across the hwy and back and ended up next to the train tracks. Lucky it was three in the morning so no other traffic. Scared the crap out of me, and...

Headlights had caused a few roll starts for me too. In my 2002 D22 the wires are pink/white out of headlight switch connector that goes to the positive of the piezo and the blue/white on the back of the ignition barrel for the negative of the piezo. All up cost less that $5 Sorry about the pix...

I mounted mine in the left side of the rear bar, as close to the centre as possible. I found that the number plate lights can over expose the image at night. From here I ran the cable through my left rail all the way to the engine bay where it enters the car from a tiny hole drilled through the...

This is quite a simple process for the D22, not sure about D40s. Most ignition barrels earth a point when not in use (they are either on (12V) or Earthed (0V)) regardless of make or model. I used to think they just went open circuit. So all I did was pull the shell off the steering column, find...

Fantastic drawers. I would love a copy of the plans if some one is willing to PM me (or if they can be posted on here). Thanks in advance, Leigh

Alan, Bugger about the turbos. You got yourself a bargain there - $155 My bro in-law has a R33 I wonder if the intercoolers are the same? Any idea on how you plan to mount it The guy with the manifold has told me he will have more in Oct so I'll have to wait before I can get involved You will...

Keep me posted Alan. I plan to do the same and am looking at mounting a front mount intercooler as my brother in law has a GT-R that he is constantly spending money on so I have some intercoolers and spare turbos lying around waiting to be used

I contact the guy with the above manifold and he replied with the following info. "Hi Leigh, we have one QD32 Turbo Manifold left - $299.00 + Regd Mail postage to Victoria $21.00 - Total $320.00 We can also supply the following kit: Nissan TD25, TD27, QD32 Turbo Manifold T3 /T4 Turbo with...

Hey Jeznik, Sorry for the late reply. I asked the same question a while back and Markus from Tassy sent me the following photo. Hope it helps you. Cheers, Leigh

Hey Alan, I was looking at buying one as well, except some one bought them before I got the chance Are they any good? Does the turbo fit under the bonnet seeings as its a top mount manifold? These are the best looking manifold I've seen, better that the log style out there. It looks like Nissan...

I'm looking at doing the same after finding out the prices from Denco and AXT Here is the Denco manifold price Online Store - Denco Diesel & Turbo still waiting for AXT to get back to me but you can see how basic the AXT one is from this doc...

Big Orse, I don't suppose you have any pix for your lift, Plus what are are Helper Springs? I've never heard of them. I have added details from the Workshop Manual (series 1) about the torsion bar to help clarify a few things. Hope it helps

I have been reading what feels like every post on here but can't get an answer to this one. My mate has just completely written-off his D22 with a ZD30. I have a D22 with a QD32. He is willing to rip the turbo and plumbing off and give it to me once he gets his rig back. I need to know if...