Search results

I bought the one in your first link from sunyee, just so happens I finished installing it today as well. Pretty happy with the light output on a quick test out on the open road Here is where I mounted mine, wanted a slim line fit

I just installed a small forefront industries catch can on my 2012 ST, hose on vehicle was 16mm or 5/8 equivalent, catch can had 19mm ports or 3/4 equivalent. For the guys installing a catch can in Perth, I searched high and low for a supplier who could supply a one piece barb adapter. Found a...

Hi Guys Appreciate all your feedback. I am however more interested being able to lock a diff than to install a good lsd. Hi Tony What's your thoughts on the write up on the ARB website in regards to which end to lock...

Hi Guys Been thinking real hard of my next modification and can't seem to get past the value of a installing a locker. From what I have read so far, a locker up front may not be best on the D40's as the diffs are rather weak? so the rear looks to be the go? Tried looking for some recent...

Cheers for the heads up nathand22, just checked mine and those 2 tabs are about 2 inches away from my plate, plenty of clearance .... i hope! Mike

The 2607's have the exact same spring rate as the 2608's, only difference is the 2608's are set approx 10mm longer to cater for sag with the weight of bullbar and winch. From memory the OME springs arent too much heavier than the factory springs, hence why I think there are so many people...

Before and after shots of the mod, notice how close the plate sits to the radiator in the after shot. Mik

I've got the ARB UVP's on my 2012 ST. They are an extremely well made looking bash plate, bolts are hidden and easy access points for changing oils, but ....... for some reason on mine, could be the variations in models of these thai and spanish navs, they had to use a flimsy adapter bracket on...

Just checked both my stickers on the springs. The old ones only had 2608, these new ones are OME-608 X on the left and right, it also has this below O/N 439101, presuming it's an order number. Hope you get somewhere with this Mik

Gday I recently had my front OME springs replaced under warranty. I had installed the OME 2608's. I had installed the Steel deluxe winch bar and the UVP, after installing the winch the front sagged even more (can't remember the exact measurements). The replacement springs have raised her...

Hi all Been a long time lurker to this great forum, thought i'd join up and say hi. This place has been an abundance of great info, keep up the great work. Rgds Mik