AussieMark
Member
Hi Guys,
Does anyone know if bash plates from a 2006 Spanish STX D40 will fit a 2012 STX 550?
Thanks,
Mark.
Does anyone know if bash plates from a 2006 Spanish STX D40 will fit a 2012 STX 550?
Thanks,
Mark.
Bash Plate Compatability
- Thread starter AussieMark
- Start date
Help Support Nissan Navara Forum:
BMGTZ
Member
Arb told me they dont....they have recently released 550 plates. I have fitted these and they seem pretty good. Fitting instructions were written by an idiot tho
AussieMark
Member
Great - thanks for the info. Looks like a 2nd hand set of bash plates is now for sale!
raptorthumper
Member
Have you got any photo's of these. Mainly interested in the front plate. I have fitted ARB bash plates to my 2012 V6 STX, but I had to install a 50x25 RHS cross member under the intercooler for the front plate to bolt to. (with 4 M8 nutserts installed) This is because the ARB bull bar is different in this area on the 550's. I also had to drill a couple more holes and install nutserts for the transmission plate as the rear holes didn't line up on the transmission cross member.
_
raptorthumper
Member
Just found the difference in the front plate for the V6 Nav's . see below.
Std 4cyl Navara bash plates
V6 and 550 ARB front plate
_
Std 4cyl Navara bash plates
V6 and 550 ARB front plate
_
