Body mount Bolt length

[Pete-nav]

Hi all,

Can any one help me out and tell me the standard Body mount bolt sizes (Length and Dia.) used on the d22's, just the bolts for the cab?

Thanks
Pete

 

[loco12]

they seem to be different on different models, my 2008 was different to the lengths i got from a 2006.
you best/safest bet would be to pull them out and measure them, there are only 4 down each side should only take you 30 min or so, then you know you have the right information.
i made a 30mm body lift and these were the bolt lengths i used on the cab including the 30mm extra:
2x M12x170 metric fine (had to make these)
2x M12x130 metric fine
4x M10x130 metric fine
hope that helps.

 

[Pete-nav]

Thanks for that, yeh might have to pull em to see then, Mine is an '03.

 

[simthorpe]

hey guys i am looking at doing a body lift in the next few weeks, loco12 do you have the sizes you got from the '06 model d22 at all? i have an '06 and need all the sizes including the rear tub. also if anyone else knows the sizes i would be greatly appreciative

dave