D22 R180A Ring/pinion??

[Lawry]

Just discovered when i'm under the car turning the front drive shaft, you can hear a Click click click every few revolutions.

So i suspect that the noise (Clunk) im hearing after a good 4x4 trip is a front diff, in particular the Ring gear.

so is there anywhere cheap i can grab a ring gear for a R180A

or is anyone selling a complete d22 front diff housing?

also whilst i'm at it i might as well do the from CV, im particular the Right hand CV

let me know

cheers

 

[Lawry]

Bought a new CV and installed it in the right side, No change in the Clunk, it appeared to come from the left side so i put the CV that was removed in on the left side as it was in good condition.
It has fixed one of the issues as that CV was stuffed! The ball bearings were just floating around in the boot.... :/

Anyway there is still a clunking noise, so it looks like the Diff has had it....
as the hubs are fine.

So anyone had a R180A diff and housing for sale? know any one doing a SAS conversion or even a ride off?

cheers