fire wall grommet's

[greynavara]

can any one help I am trying to find a spare grommet on the firewall so I can install a boost Gauge line and can locate one please help thanks

 

[happy john]

Hey mate follow the bonnet cable poke your tubes through with a bit of lube "no jokes please" then a dab of sealant and you should be fine.

 

[sparra04]

Hey mate follow the bonnet cable poke your tubes through with a bit of lube "no jokes please" then a dab of sealant and you should be fine.

My throttle cable hole is full,no amount of lube will help it
I drilled a fresh one just above it,ran my boost and egt through it then sicaflexed it
If water level gets that high then a little bit that may find its way in through that tiny hole will be the least of my worries

 

[04SilverSTR]

i have a bung just above the heater hoses, but it seems that they have deleted that in the later models as per from a mate who was fitting a uhf on the weekend and didnt know where to run the cable, ended up going the throttle cable route.

bryan