brendo Member Joined May 28, 2011 Messages 124 Reaction score 1 Location Gillieston heights Jun 13, 2011 #1 hi i have a d22 with a 2inch lift and was wondering if i need to do anything els to fit 32s to it.
alphabet Member Joined Nov 2, 2010 Messages 479 Reaction score 0 Location Caloundra Jun 13, 2011 #2 Maybe cut the inside corner of the mud lap if the noise annoys you.
brendo Member Joined May 28, 2011 Messages 124 Reaction score 1 Location Gillieston heights Jun 13, 2011 #3 ok thanks mate
dirtjockey Member Joined Nov 13, 2009 Messages 207 Reaction score 0 Location Brisbane Jun 13, 2011 #4 I needed to knock back the front part of the inner guard (with a big hammer) on mine (same setup as you) or it would rub real bad on 3/4 to full lock. You can do this and then trim up the mudflap and screw it back into position and you can't tell.
I needed to knock back the front part of the inner guard (with a big hammer) on mine (same setup as you) or it would rub real bad on 3/4 to full lock. You can do this and then trim up the mudflap and screw it back into position and you can't tell.
brendo Member Joined May 28, 2011 Messages 124 Reaction score 1 Location Gillieston heights Jun 13, 2011 #5 ok thanks mate will have a look at that