ozstickman
Member
I use a stubby cooler to prop the lid.
No, stubby holder is ment to hold a STUBBY!
I use a stubby cooler to prop the lid.
No, stubby holder is ment to hold a STUBBY!
Ahh I agree, but doing this ensures I HAVE one when I pack the fridge .... throw it straight in... I keep another one on the stubby lever in the cab too.
Hope this link worksDo you have a link to the digital controller you used. I wouldn't mind one for my fm70
I just cut the positive from the feed in, took that to the digital controller, middle plug 3rd from left. Bridged to 2nd from left. Then from first back to the input for the old thermostat. Negative goes to the fourth pin. It comes with its own thermostat which I pushed through into the fridge . The two leads go to the two inputs on the right.Thanks mate, so you just wire this in the place of the old dial thermostat?
Sorry was away on an excursion. Have emailed photos.Panuara, have sent you a PM, not sure if it's getting through?
Boostin 7, have you PM'd Panuara for the details yet?,
if you don't get any response back because he can get busy, i still have the email Panuara sent me so i could forward it on with his permission.
Enter your email address to join: