Turbo timer new in box - SOLD

[nathand22]

i bought the same model TT, shipped from Thailand delivered to Aust $60

it's not plug and play - from memory 3 or 4 wires need to be tapped into on the back of your ignition switch.

you will also need to run a wire form the handbrake switch to the TT - brown wire from memory. it's illegal to connect the handbrake wire from the TT to ground, it's a very unsafe practice.

i also found their colour code didn't match to the drawing! But being i sparkie i accepted the challenge!

i'd have the wiring connection at home for connection details of the TT to ignition switch.

yes, you'll have the issue or waiting for the TT to count down before you lock up.

if you need it, let me kow.

If you could forward a copy of that onto this thread for us it would be a great tool for other users and very handy for the member who just bought my one as the directions are very hard to read on the paper its all blurry but still can be made out.

Thanks,
Nath.

 

[mike1303]

Try this one guys

http://www.navara.asia/showthread.php?t=14887

 

[myoldhk]

Got thesame one works great! And doesnt connect any wire to handbreak!
And I posted destructions on here somewhere.

 

[mike1303]

That would be the link just there!! ^^^ good write up mate

 

[Cobez]

Hence why i bought the plug and play version (different to one sold here). No wiring involved. Unplug ignition plug, plug this is in. Done.

 

[myoldhk]

Thanks
Plug and play is always good, but couldnt warrent the extra price at that time. And essentialy I enjoy installing this stuff and figuring out how it works.
But this install took me 2 days including research and studying the nissan workshop manual. Should only take an hour to install tho.

 

[Cobez]

Always good to learn! I got this one as the little analogue screen fits in the spare switch squares so its nice and tidy

 

[myoldhk]

Same reason. And looks neat.

 

[mike1303]

Hence why i bought the plug and play version (different to one sold here). No wiring involved. Unplug ignition plug, plug this is in. Done.

Perhaps a link to the PnP version?

 

[Cobez]

http://www.ebay.com.au/itm/111276161189?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649


There ya go

 

[mike1303]

Thanks mate it's a damn shame I've only got one rocker switch location :/

 

[iamrichardthelionheart]

to give an extra rocker switch location, i pushed out the headlight adjustment device, and cable tied it up out of the way. The TT display is now installed in it's place, and looks like an original installation.

i never have a need to adjusts the headlights up/down....and if i do well the switch is still connected.

If you want 3 more rocker switch locations, remove the blanking panels under neath the A/C controls. Here i installed 3 more rocker switches for winch isolation, battery link, and reverse lights.

and that stupid coin tray on the centre console in front of the gear stick, the boost and EGT guages are installed there, in a dual guage pod.