Trouble installing keyless entry

Shop deals on ebay
Advertise with us
shop deals on amazon
Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
scooba_285

scooba_285

Member
Joined
Jun 15, 2011
Messages
1,190
Reaction score
1
Location
NSW
Today i was installing my keyless entry and after i had pulled everything apart and started mounting and wiring i noticed that where it has to split into the ignition wiring harness with the connections, is where i already have my Boggard turbo timer split into the ignition, so I am unable to go any further. Anybody know a way around this? I thought about cutting a soldering the turbo timer in but I'm not much of an electrician and would get the wires mixed up. Any thoughts would be much appreciated
 
So you have a kit that plugs into to wiring harness. Your turbo timer also plugs into the harness at the same spot. I would be cutting and soldering the turbo timer onto the wires for the keyless entry kit that way it could still be unplugged if needed

Sent from my GT-I9000 using Forum Runner
 
Try it like it is.

Worse thing is, you could blow a fuse.

The key will still get you in.
 
Nah I cant try like it is because of the plugs, it's one or the other so far
 
I payed a local auto sparky to do mine.

Mine has an alarm and a Greddy turbo timer that work together.
 

Similar threads

J
Ignition Wiring
Replies
3
Views
574
Old.Tony
Old.Tony
T
Keyless entry disable
Replies
0
Views
728
tony_1
T
W
Help with amplifier installation
Replies
0
Views
236
Woogzter
W
B
2014 D40 Thai trailer plug and wiring harness
Replies
1
Views
657
MANNING
MANNING
I
Upgrade the original halogen driving lights to LED what could be simpler
2 3
Replies
52
Views
4K
Phunk
P

Latest posts

Back
Top