PDA

View Full Version : Std bridgestone tyer replacement


tbblitz
16-11-2010, 05:09 AM
Hi everyone i have a 2009 D22 and have the stock bridgestone tyers on and they need replacing. I do about 4 4wd weekend trips a year so not a lot but i need a good tyer to replace what i got.

My question is will my ride change much with the tyers i get?

I got a 2 inch lift EFS shockers. The ride is better than what it was STD but its still bumping when nothing is in the rear tub.

Will the ride be softer if i get bigger tyers or will it be the same?

Also what do you recommend.

UncySpam
16-11-2010, 06:06 AM
the bigger the tyres the worse the ride will get.

Look at a decent A/T if your 4wd weekends justify it, otherwise go a goo H/T pattern and enjoy how well they behave on road.

nathan96
16-11-2010, 07:00 AM
If you go a LT construction the stiffer sidewall will also reduce ride comfort.

Go the same tyres again if you were happy with their performance and mileage

Otherwise consider a HT or AT from one of the other brands.

You might want to investigate Goodyear silent armour as an in between choice

daz d22
20-11-2010, 12:05 AM
I have a 2010 str with 2800ks on clock i have cooper st thay r breaking lugs of after 2000 ks i think thay r crap