Search results

Not that I can find. It's slightly different to the other mounts along the hose. The way the mount above it is mounted it looks as if the hose comes from the top back of the engine and runs down to somewhere. I feel if it was a breather it would run upwards somewhere. I may have to find...

I thought It might of been a breather hose but then I seen a T section where it T's off into different directions. Due to the location of where it T's off its hard to follow where the hoses go

Just wondering if any one was able to help. I've found a vacuum hose unplugged (another 🙄) I've been in the engine bay, under the engine bay searched for hours and cannot locate it. The hose is on the passenger side and comes from a T piece above where the trans bolts to the engine. It hangs...

Has any one else found its almost impossible to search engine info on np300 engines? The old d22 you could type anything into google and find everything you need to know. When it comes to the np300 engine there is absolutely no info out there 🧐

Hi guys, so I've just installed a 2 inch lift coil front and back and new shocks. Back is perfect however the front I feel is not so perfect. The shocks that were supplied look as though they are the same length as the factory ones. Once installed I feel like there is barely any travel...

I'm pretty sure they actually ground thru the brackets that bolt the unit into the dash. However I have actually ran the ground wire off the new one straight to an earth point. Could a faulty relay cause this issue?

I'm not running the factory twin batteries, it has the redarc dual battery system installed. I will try as you suggested regarding the earth, however I had the DVD touch screen installed for a good 2 years before this problem occured and nothing has been changed or played with. It just randomly...

Hi, I'm having trouble with my battery draining almost flat overnight. My cranking battery is in good shape and it's quiet a big battery. I have tested with a multimeter and the touchscreen cd player seems to be drawing alot more than it should. If I unplug the harness from the back of the head...

I bought the bluesteel heavy duty. $440 They told me there made by australian brake and clutch but beeing a wholesalers they have to rebrand them under a different name. The quality look good and seems to be going great so time will tell i guess

Thanks for the help. So the issue was when going from a standard clutch to heavy duty most the time you have to adjust the hydraulics to suit. In my case the pushrod adjuster on the back of the pedal to the master cylinder i undid the lock nut and turned the rod approx 1 turn back into the...

Yea i have tried that. But as i said i cant see that beeing the issue as none of the hydraulics where undone or altered in any way.

Ive had a go at bleeding it but you dont undo any of the hydraulics. So i didnt really think that would be the issue. Its kinda like the piston in the slave cylinder isnt fully retracting, if i pull the pedal up then the piston retracts all the way and the clutch fork comes right back. Which...

Hi guys, Soo ive just spent the whole weekend putting in a new clutch. What a job on ur own without a hoist. Any finally finished. All went pretty however going for a test drive something isnt right with the clutch pedal. It engages almost instantly when releasing and the peadal doesnt come all...

My boost gauge is tapped into my manifold so i see what the actual pressure the engine is recieving. I have found my problem. The boost adjuster was not installed correctly. I have now installed it correctly and at full throttle im boosting 19psi and its holding 19psi while im full throttle. I...

Hi there, i have a quiery regarding my boost pressure. I have just installed an adjustable boost reg. And standard before installing it i was at 15psi as stock. I have tweeked it up to about 19. However when im driving it still sits at around 15psi. If i give a good stab on the accelerator my...

And also would anyone know if the mounts will line up from hilux to navara? Its no big deal if i need to move and re weld them but would be handy to know before hand

Ok cool. Thanks for the quick reply. Just thought it might look a little funny sticking out so much.

Hi there guys. Just wondering if any one that has steel trays on there car could tell me there widths. I purchased a steel tray that came from a dual cab hilux. The overall sizes are 1870w x 1870L From other trays ive measured it seems to be the normal size. However on my d22 from what i can...

Ill wire like you said when i get some time and see how it goes. Thanks for your help i appreciate it

And yep its the little silver one